The best intake if you plan on running a SHA 15.15
January 13, 2026
taco eater :
Nathaniel from SPOKANE, WA United States
This is the 4th intake I've bought to try to fit the Dellorto carb. I had to open up the carb a bit with a flathead to get the shim to fit, but once it was snug the intake slid in with an air tight fit.
It is FOWARD FACING, meaning the carb is PURPOSELY facing the front wheel, this might be a problem with some carbs being force fed air, the dellorto filter cap mitigates that problem.
My only gripe is the poor port matching, pretty small and round, but makes since as all cylinder heads are different and allows easy modification with a Dremel.
PS: airsal kit screws are too long by around 5mm, expect to get new.
Was this review helpful to you?
0 taco eaters like this review
Not any angled cylinder intake
February 21, 2024
taco eater :
Joshua Goodwin from Clermont, FL United States
This will not work on the Airsal 70cc cylider kit for my Sachs 505. If you face the intake in the correct direction for the factory carburetor location, the bolt holes are angled and will cross thread or have a severe leak that a gasket can't fix. However, if you turn it 180° so that a Carburetor is facing forward, the bolts will align flush. (Maybe, mine is defective and was welded 180° off.)
The best intake if you plan on running a SHA 15.15 
Not any angled cylinder intake