MLM honda express 15mm SHA complete intake with fender bracket
MLM honda express 15mm SHA complete intake with fender bracket


motion left mopeds 15mm SHA intake for use with the honda express NC50 NA50 and a 15mm SHA carburetor!

this one is a complete unit vs the shorty one we sell that bolts to the stock intake!

features rear fender bracket and a cable holder

any 15.15 SHA will work fine, just make sure it comes with a 1mm shim. if not, you can get a 1mm shim here!

Please make sure you use the correct shim!!!

around 37mm eye to eye

taco rating 5 of 5 Total Reviews: 1 give your taco rating here

  0 taco eaters like this review
Be done with oil injection forever June 26, 2019
taco eater : Goshen Mopeds from Goshen, IN United States  
This intake is the perfect solution for a tired old express. for reference, i removed the oil injector and used a rubber expansion plug to replace it which worked beautifully. this intake is great but honda uses philips head bolts on the original intake, so make sure you are using the right philips head or it will strip like soft wisconsin cheddar. I used an impact driver bit in an 8mm socket with a ratchet and it worked beautifully. your jetting may vary but i used a 64 with the mesh screen removed and a compact chrome filter and its spot on perfect. i did two back to back. one required some paper gaskets and indian head shellac to seal because the rubber ring had gone brittle, the other was still in very nice shape and did not require additional gaskets. your experience may vary but id get 2 of the paper gaskets just in case. you can re-use the existing throttle cable if you are clever. of the two, one i did, one i didnt.

Was this review helpful to you?