MLM batavus M48 VM18 clamp style intake + PHBG
MLM batavus M48 VM18 clamp style intake + PHBG
 
  $50.00

 :HERE NOW!!

Free Shipping
qty:

 
 
motion left mopeds 18mm clamp style intake for the batavus M48 engine and a mikuni vm 18mm carburetor!

this intake will work with batavus M48 engines but to install you must feed the throttle cable through a tight spot in the frame and turn the choke lever the opposite direction, all easy stuff, no problemo!

comes with two m6 x 20mm stainless steel allen bolts!

oh this just in! this intake will also work with a dellorto PHBG clamp style carb with the 1.5mm shim and the spigot style!!

taco rating taco rating 4.5 of 5 4.5 of 5 Total Reviews: 2 give your taco rating here

  0 taco eaters like this review
 
4 of 5 Still Deciding September 11, 2022
taco eater : Ernest Tooth from Armstrong, BC Canada  
Firstly: Do not second guess your decision to put a mikuni on your bat. Totally worth it. It mates perfectly to this intake.

On mine, I found that the mounting plate extends a bit into the tube area, obstructing some air flow.

I also had to file down the weld to fit the included hardware

The carb sits at a bit of an angle, tilted down towards the air filter (and the fuel over flow).

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Purrrfect March 14, 2014
taco eater : Blake Long from Columbia, SC United States  
No problem putting this bad boy on and the upgraded carb/intake combo goes great with the 60cc kit for the bat!

Was this review helpful to you?