 |
 |
 |
|
remove your original swingarm and swap it for this special MLM swingarm made to work with the rear brake plate this pack comes with. its shorter than the normal puch brake plate so the brake tab is more forward and the cable holder is welded in. if you need the other side of the clamp, here are some parts for ya!
for puch MAXI or MAGNUM !!
pair the front wheel up with some EBR disc brake forks!!
for axles, space it out however you need. this is tha best axle, comes with all the spacers n such. there are two lengths, so check how far your fork legs are apart. also, if they are super far apart, you can get this looong axle! the 190 with spacers is good for rear but you need magnum axle adjusters too!
this wheel has a special super strong specially constructed delrin hub that attaches in the wheel and holds the disc. the wonders of...science!!
the front wheel wheel will fit in forks that have spacing greater than 90mm wide. rear is fine in the swingarm it comes with.
rotor is 220mm. same size as the mike thomas disc, hint hint!
here are some good
disc brake assemblies that bolt right on to ebr disc forks (not the mini one tho) there are lots of other disc assemblies to choose from. space it out, get creative, make it work....ya know???? tires are brand new 17 x 2.50 mosquitos all mounted and ready to go!!! mounting tires sucks and is not really fun
has sealed bearings already installed for 12mm axles! get replacement 6201 bearings here.
heres a freewheel or supreme freewheel!
the pads that come with the brake plate are...ok. grab some better ones here if you want!
uses a 98mm rear sprocket. any of these rear sprockets will line up!
if you need bolts for the rear sprocket, get (5) m6 x 35mm hex head bolts and probably some m6 nuts and washers.
**might have a scratch or two. you can see some in the picture. everything has a few imperfections, sorry, its just the way of the world!**
|
|
|
 |
|
 |
|
