puch 70cc hi hi compression head
puch 70cc hi hi compression head
 



  $30.00

 :HERE NOW!!
qty:

 
 
****NOTE we ran outta these and will have more in 2-3 weeks. for now, we are sending the 70cc o-ring head without the o-ring! do not fret, the o-ring head can be ran with a regular ol traditional head gasket with absolutely no issues whatsoever. PLUS if you wanna run an o-ring in the future for a pinch more compression, all ya gotta do is grab an o-ring for a couple bucks!!***

usable on the numerous 70cc kits like athena, tccd, kstar as well as the 64cc polini, and the 65cc metrakit. compatible with puch maxi, magnum, dart, cobra, swinger, pinto, freespirit, newport, kromag, etc. works perfect on tomos and yamaha chappy as well. bolts on, no problem. If you want to use this head for non puch applications, be sure your spark plug is the correct model. this head uses short plugs like these. do not use the wrong plug length AND check and recheck your squish and the spacing before you run this head with this setup. or suffer the consequences. the stock head is totally usable on this setup as well, it is all in your hands, don't destroy your new kit.

taco rating taco rating 4 of 5 4 of 5 Total Reviews: 25 give your taco rating here

  0 taco eaters like this review
 
1 of 5 Does not work on 45mm Tomos Alukit March 17, 2018
taco eater : Swaggy Steve from Washington, DC  
Don't be fooled.
Despite the fact the description says "usable on the numerous 70cc kits like athena, tccd, kstar..." it did not work on my tomos 45mm kit (Alukit for the people) regardless of gasket used. I'm not sure why this is supposed to be compatible as the mating surfaces simply do not match up. It's not even close... anyone should be able to see this as there is a visible gap between the head and the rest of the motor.

EDIT TREATS : this combo is used by hundreds of people. I suspect something else is going on if you are having issues with it sealing. Contact us and we will try to help you out!

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 What does it mean? July 30, 2017
taco eater : Jeroem from West Pittston, PA United States  
The last sentence of the description mentions using your stock head with this setup...how does one use their stock head with this Hi-Perf replacement head?

To borrow a phrase from the olde-tyme Saturday morning cartoons...What is the meaning of this?

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Good quality, FAST shipping! June 12, 2015
taco eater : Jack Koetje from Hudsonville, MI United States  
Works like a charm and I got it in under two days! Thanks Treats!!!

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Quality head January 24, 2015
taco eater : Maci Dub from Dubvue, WA United States  
Solid casting and good machining.  Works well with 45mm Airsal.

.5mm edge clearance, check your squish and adjust with the right thickness base and head gaskets.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Radicle October 17, 2014
taco eater : Anonymous Person from visalia, CA United States  
Put this on the Malossi.Use their head gasket.The piston comes extremely close to the dome and with a stock YT 60 gasket it will make contact so dont try it.Also dont let the carbon build up on your piston or it will make contact otherwise it makes some radical power.Dont worry about reworking the dome just keep your piston clean and be careful.

Was this review helpful to you?

View All Customer Reviews