|
|
|
|
|
USED 17" honda hobbit pa50i pa50ii rear spoke wheel
|
$149.99 alternate reality price $127.99
HERE NOW!!
|
|
|
USED original rear spoke wheel for yer honda hobbit, camino, pa50i or
pa50ii! rad! nice chrome and spokes, not rusty. true and has a nice rim!
comes with a 17 x 2.50 heidenau k56 that is in amazing condition and super low mileage but from 2015.
|
|
|
|
|
|
|
|
|
|
NEW peugeot 102 plastic pulley with 11t sprocket
|
|
HERE NOW!!
|
|
|
NEW solid black plastic drive pulley for peugeot 102 mopeds.
|
|
|
|
|
|
|
|
|
|
peugeot 103 MVL front fender lower bracket CLAMP
|
|
HERE NOW!!
|
|
|
replacement lower fender bracket/guide/stay clamp for peugeot 103 MVL!!
slightly longer than the regular 103 version
|
|
|
|
|
|
|
|
|
|
peugeot 103 engine mount bolt with hardware
|
|
HERE NOW!!
|
|
|
peugeot 103 engine mount bolt + washers, spacers, etc.
M10 - 1.0mm thread partially threaded bolt
170mm long
|
|
|
|
|
|
|
|
|
|
solex 3800 complete gasket set - version 2
|
|
HERE NOW!!
|
|
|
complete 50cc gasket set + fuel pump membrane for the solex 3800! wooooow
version 2 comes with all these gaskets! i believe the case gasket is the main
difference but be sure to look at the photo carefully before ordering.
|
|
|
|
|
|
|
|
|
|
solex 3800 complete gasket set - version 3
|
|
HERE NOW!!
|
|
|
complete 50cc gasket set for the solex 3800! wooooow
version 3
comes with all these gaskets! i believe the case gasket is the main
difference but be sure to look at the photo carefully before ordering.
|
|
|
|
|
|
|
|
|
|
solex 3800 complete gasket set - version 4
|
|
HERE NOW!!
|
|
|
complete 50cc gasket set + RED fuel pump membrane for the solex 3800! wooooow
version 4 comes with all these gaskets! i believe the case gasket is the main
difference but be sure to look at the photo carefully before ordering.
|
|
|
|
|
|
|
|
|
|
OEM original tomos nude 16" front grey lightning mag wheel
|
$125.00 alternate reality price $89.99
HERE NOW!!
|
|
|
original OEM brand spanking new tomos FRONT grey mag wheel!! in the nude, you build it! you're in luck, we have all the parts to put it together too!!!
GREAT for solar electric car competitions!
tomos part number 23010
|
|
|
|
|
|
|
|
|
|
OEM suzuki FA50 seat pin CLIP
|
|
HERE NOW!!
|
|
|
OEM suzuki seat pin CLIP for fa50, fs50 and a ton of 60s and 70s motorcycles.
suzuki part # 09385-06001
|
|
|
|
|
|
|
|
|
|
OEM honda NC50 helmet lock n key set
|
|
HERE NOW!!
|
|
|
OEM honda helmet holder lock n key set for honda express NC50!
fits 1981 NC50 but may fit other years as well!
|
|
|
|
|
|
|
|
|
|
OEM honda express NC50 oil pump setting BAND clamp
|
|
HERE NOW!!
|
|
|
OEM honda 1978-1980 NC50 express oil pump setting BAND! keeps the oil pump in its place ya know.
honda part # 15531-147-020
|
|
|
|
|
|
|
|
|
|
OEM honda NA50 NC50 NX50 NQ50 NB50 TG50 SA50 steering stem NUT
|
|
HERE NOW!!
|
|
|
OEM honda steering stem NUT for sooo many scooters n nopeds. fits NA50 NC50 NX50 NQ50 NB50 TG50 SA50 and more!!
honda part # 90301-147-010
|
|
|
|
|
|
|
|
|
|
OEM honda express NC50 oil pump SEAL set
|
|
HERE NOW!!
|
|
|
OEM honda NC50 express oil injection pump SEAL set! apparently this is for 1977 models, but may work on other years as well!
honda part # 91210-147-305
|
|
|
|
|
|
|
|
|
|
OEM honda express NC50 handlebar choke LEVER
|
|
HERE NOW!!
|
|
|
OEM replacement choke LEVER for the 1977-1980 NC50 express and 1980 NA50 express II
honda part # 17961-147-000
|
|
|
|
|
|
|
|
|
|
OEM honda express NC50 brake lever COVER
|
|
HERE NOW!!
|
|
|
OEM replacement rubber brake lever cover for the 1980 NC50 express and
1980 NA50 express II. probably fits other years and models as well!!
honda part # 53179-147-970
|
|
|
|
|
|
|
|
|
|
OEM honda NC50 stopper pivot BOLT
|
|
HERE NOW!!
|
|
|
OEM honda NC50 express stopper pivot BOLT! new old stock!
for 1977 NC50 express! may fit other years as well!
honda part # 28297-147-000
|
|
|
|
|
|
|
|
|
|
OEM honda NC50 transmission breather CAP
|
|
HERE NOW!!
|
|
|
OEM honda NC50 express transmission breather CAP! new old stock!
for 1977 NC50 express! may fit other years as well!
honda part # 11212-147-000
|
|
|
|
|
|
|
|
|
|
OEM honda express NA50 NC50 front fender STAY
|
|
HERE NOW!!
|
|
|
OEM honda express front fender bracket. fits 1977-1981 NC50 express and 1979-1981 NA50 express II.
oem honda part # 61104-147-670
|
|
|
|
|
|
|
|
|
|
new 1.4 x 17 aluminum spoke FRONT wheel with 220mm rotor - FASHIONABLE BLACK
|
|
HERE NOW!!
|
|
|
1.4 x 17 aluminum spoke FRONT super heavy duty wheel with 220mm rotor and 12mm sealed bearings! raddddd. Perfecto for all your spoke disc fantasies.
|
|
|
|
|
|
|
|
|
|
morini eurocilindro 42mm A piston
|
|
HERE NOW!!
|
|
|
morini eurocilindro 42mm replacement piston with single L ring (dykes ring)!
bore - 41.95mm size A
|
|
|
|
|
|
|
|
|
|
kinetic STARTER clutch shoes
|
|
HERE NOW!!
|
|
|
kinetic replacement STARTER clutch shoes! not sure which exact kinetic model these are for so check the dimensions within...
|
|
|
|
|
|
|
|
|
|
OEM genuine kinetic CLUTCH shoe set - version 2
|
|
HERE NOW!!
|
|
|
OEM kinetic genuine replacement main SINGLE SPEED clutch shoes!
these are very similar to vespa piaggio single sped clutch shoes!!
you get three shoes
|
|
|
|
|
|
|
|
|
|
OEM genuine kinetic CLUTCH shoe set - version 1
|
|
HERE NOW!!
|
|
|
OEM kinetic genuine replacement main clutch shoes for SINGLE SPEED! these are a totally different size than the vespa piaggio ones, unique to kinetic!!
|
|
|
|
|
|
|
|
|
|
NOS OEM suzuki FA50 stock carburetor
|
|
HERE NOW!!
|
|
|
NOS oem suzuki FA50 carburetor! made by mikuni.
ATTN! Notice the
offset in the bolt pattern in the photo! please confirm that your bike
needs this style carburetor BEFORE ordering!! if you need one without an
offset in the bolt
pattern, look here pardner
|
|
|
|
|
|
|
|
|
|
solex DELUXE ignition points
|
|
HERE NOW!!
|
|
|
new deluxe ignition points for velosolex mopeds!
|
|
|
|
|
|
|
|
|
|
USED oem honda ncz50 motocompo seat
|
$179.99 alternate reality price $169.99
HERE NOW!!
|
|
|
USED oem honda motocompo seat in amazing condition! the rarest of the
rare!!!! i wouldn't use this on anything but a true motocompo! you hear
me?!
no tears in the cover, just couple tiny nicks and some dirty spots. pan is in amazing condition as well.
|
|
|
|
|
|
|
|
|
|
NOS domino tommaselli 32mm / 35mm clip-on handlebars
|
|
HERE NOW!!
|
|
|
new old stock original tommaselli / domino clip on handlebars!
fits 32mm or 35mm fork tubes!
|
|
|
|
|
|
|
|
|
|
morini M1 M01 jammer clutch v0.0 !!!
|
|
|
HERE NOW!
jammer is now available in morini M1 and M01 flavor!
|
|
|
|
|
|
|
|
|
|
puch grimeca 5 star REAR disc conversion PACK
|
|
|
HERE NOW!
NEW NEW NEWWWW rear disc brake set up with custom machined hub for the puch 5 star mag wheel!
|
|
|
|
|
|
|
|
|
|
wicked curve complete CDI ignition kit for minarelli V1 - with FAN
|
|
|
HERE NOW!!
wicked curve gets its own cdi!!!
beyond OEM quality wicked curve for minarelli V1 cdi kit with options for AC or DC
includes the fan and fan mounting screws!
|
|
|
|
|
|
|
|
|
|
wicked curve complete CDI ignition kit for minarelli V1 - DC version with FAN
|
|
|
HERE NOW!!
wicked curve gets its own cdi!!!
beyond OEM quality wicked curve for minarelli V1 cdi kit
DC version! includes the fan and fan mounting screws!
|
|
|
|
|
|
|
|
|
|
zinc plated M8 10.9 countersunk screw - 50mm
|
|
HERE NOW!!
|
|
|
just a good old M8 zinc plated 10.9 grade countersunk screw!
M8 x 1.25mm threading
50mm length
|
|
|
|
|
|
|
|
|
|
puch grimeca 5 star REAR disc conversion PACK with rim
|
|
|
HERE NOW!
NEW NEW NEWWWW rear disc brake set up with custom machined hub for the puch 5 star mag wheel!
|
|
|
|
|
|
|
|
|
|
intake BLOCK-OFF plate - PUCH airsal 46mm / eurokit / MK65
|
|
HERE NOW!!
|
|
|
wow! a nice n simple block-off plate for hackers, tuners and gurus!!
this plate is for puch 65cc 43.5mm metrakit, airsal 46mm and eurokit!
|
|
|
|
|
|
|
|
|
|
zinc plated M8 10.9 countersunk screw - 45mm
|
|
HERE NOW!!
|
|
|
just a good old M8 zinc plated 10.9 grade countersunk screw!
M8 x 1.25mm threading
45mm length
|
|
|
|
|
|
|
|
|
|
IRC ix motocross 60/100-14 knobby tire
|
|
HERE NOW!!
|
|
|
IRC IX motocross tire! did anyone say DIRTPED? these would be absolutely sick on a fa50, qt50, nc50, etc.
|
|
|
|
|
|
|
|
|
|
SILVER 50cc dirt bike radiator for hackerz
|
|
HERE NOW!!
|
|
|
SILVER radiator perfecto size for moped use. originally for beta 50rr and some other shifty fiftys!
|
|
|
|
|
|
|
|
|
|
intake BLOCK-OFF plate - PUCH piston port
|
|
HERE NOW!!
|
|
|
wow! a nice n simple block-off plate for hackers, tuners and gurus!! more info within...
this plate is for regular old puch piston port cylinders, such as the
stock high torque and open port, 45mm treats kit, 44mm airsal, 45mm
airsal, 45mm parmakit, 45mm TCCD, 45mm athena piston port kit, 42mm
malossi etc.
also a close fit for stock puch magnum cylinders, tomos A3 and A55 stock
cylinders + A55 airsal 44mm cylinders! the stud holes will need to be
filed a little because the stud c-c is narrower.
|
|
|
|
|
|
|
|
|
|
intake BLOCK-OFF plate - PUCH polini / tomos A35
|
|
HERE NOW!!
|
|
|
wow! a nice n simple block-off plate for hackers, tuners and gurus!! more info within...
this plate is for puch polini, tomos A35, peugeot 103, etc!
|
|
|
|
|
|
|
|
|
|
wicked cdi FAN for minarelli v1
|
|
HERE NOW!!
|
|
|
minarelli V1 aluminum flywheel FAN for the wicked curve CDI ignition
note
this does NOT fit or work with the original points flywheel found
on v1. it's only for the complete wicked CDI kit, got it?
|
|
|
|
|
|
|
|
|
|
intake BLOCK-OFF plate - PUCH gilardoni / minarelli AM6
|
|
HERE NOW!!
|
|
|
wow! a nice n simple block-off plate for hackers, tuners and gurus!! more info within...
this plate is for puch gilardoni, minarelli AM6, etc!
|
|
|
|
|
|
|
|
|
|
IMCA plastic fun time fake shocks 280mm
|
|
*sorry none today*
|
|
|
IMCA tronic 3.14 fake 280mm plastic shocks!
for use as paper weight or conversational piece only!
not for real life use!
|
|
|
|
|
|
|
|
|
|
OEM cev BLUE BACKGROUND 40mph italian speedometer - FROZEN
|
|
HERE NOW!!
|
|
|
this is the speedometer you usually see on old used 49cc italian mopeds! made by cev! new old stock.
|
|
|
|
|
|
|
|
|
|
lusito 5" brake lever assemblies - NEON yellow
|
|
HERE NOW!!
|
|
|
the NEON yellow levers on these are about 5 inches long. comes with brake lever adjusters too! these are nice quality and even feature mirror mounting holes!
for 7/8" bars
|
|
|
|
|
|
|
|
|
|
lusito 5" brake lever assemblies - NEON orange
|
|
*sorry none today*
|
|
|
the NEON orange levers on these are about 5 inches long. comes with brake lever adjusters too! these are nice quality and even feature mirror mounting holes!
for 7/8" bars
|
|
|
|
|
|
|
|
|
|
lusito 5" brake lever assemblies - NEON green
|
|
*sorry none today*
|
|
|
the NEON green levers on these are about 5 inches long. comes with brake lever adjusters too! these are nice quality and even feature mirror mounting holes!
for 7/8" bars
|
|
|
|
|
|
|
|
|
|
lusito throttle n grip - NEON yellow
|
|
*sorry none today*
|
|
|
NEON yellow lusito throttle assembly with black lusito magnum style grips!!
|
|
|
|
|
|
|
|
|
|
lusito throttle n grip - NEON green
|
|
HERE NOW!!
|
|
|
NEON green lusito throttle assembly with black lusito magnum style grips!!
|
|
|
|
|
|
|
|
|
|
lusito throttle n grip - NEON orange
|
|
HERE NOW!!
|
|
|
NEON orange lusito throttle assembly with black lusito magnum style grips!!
|
|
|
|
|
|
|
|
|
|
puch BLACK metal flywheel cover - with LOGO
|
|
HERE NOW!!
|
|
|
nu metal flywheel cover for puch E50 and ZA50 engines.
BLACK with black rubber puch emblem (some assembly required)!
|
|
|
|
|
|
|
|
|
|
GUIA universal dash with 120kmh speedometer and ignition key
|
|
*sorry none today*
|
|
|
super rad universal single speedo dash with ignition switch and high
beam / low beam indicators!! kinda reminds me of the stock sachs G3
dash!
|
|
|
|
|
|
|
|
|
|
yamaha DT50LC 46mm 70cc cast iron cylinder kit
|
|
HERE NOW!!
|
|
|
cast iron 46mm cylinder kit for yamaha DT50U, DT50L and DT50 LC years 1988-1990
|
|
|
|
|
|
|
|
|
|
derbi REVOLUTION + honda MB5 front sprocket retaining washer
|
|
HERE NOW!!
|
|
|
replacement retaining washer for your derbi revolution start V, honda MB5, MT50, MTX, NSR, etc. front sprocket!
replaces honda part # 23802-041-010
|
|
|
|
|
|
|
|
|
|
jawa 210 complete GASKET set - version 2 more stuff
|
|
HERE NOW!!
|
|
|
complete gasket set for the jawa 210 automatic 2 speed moped!!
version 2
|
|
|
|
|
|
|
|
|
|
jawa 210 magic thyristor with built in HT coil - version 3
|
|
HERE NOW!!
|
|
|
jawa 210 magical thyristor "cdi" box device. this version has an integrated HT coil and a mounting bracket on the back! can't get spark without this critical piece of jawa technology.
|
|
|
|
|
|
|
|
|
|
puch E50 ITALKIT racing crankshaft
|
|
*sorry none today*
|
|
|
ITALKIT (gilardoni) race crankshaft for puch E50!
unstuffed and super light!!
|
|
|
|
|
|
|
|
|
|
derbi ITALKIT racing 4 petal reed block - 18mm
|
|
HERE NOW!!
|
|
|
derbi italkit racing reed block setup for flat reed, start III and start
V engines!! uses a minarelli AM6 (puch gila) reed block and fully cnc
machined aluminum reed block housing!
23mm OD intake for dellorto PHBG carburetors!
|
|
|
|
|
|
|
|
|
|
derbi ITALKIT racing 4 petal reed block - 26mm
|
|
HERE NOW!!
|
|
|
derbi italkit racing reed block setup for flat reed, start III and start
V engines!! uses a minarelli AM6 (puch gila) reed block and fully cnc
machined aluminum reed block housing!
35mm OD intake for dellorto PWK carburetors!
|
|
|
|
|
|
|
|
|
|
derbi ITALKIT competition 4 petal reed block - PWK
|
|
HERE NOW!!
|
|
|
derbi italkit COMPETITION reed block setup for flat reed, start III and
start V engines!! uses a minarelli AM6 (puch gila) reed block and fully
cnc machined aluminum reed block housing!
this version features a
rubberized intake boot/stuffer assembly and dual stage reeds! plus, an
anodized red finish! very competitive!
|
|
|
|
|
|
|
|
|
|
derbi ITALKIT competition 4 petal reed block - PWK
|
|
HERE NOW!!
|
|
|
derbi italkit COMPETITION reed block setup for flat reed, start III and
start V engines!! uses a minarelli AM6 (puch gila) reed block and fully
cnc machined aluminum reed block housing!
this version features a rubberized intake boot/stuffer assembly and crazy two part 8 petal reed block! extreme!!
|
|
|
|
|
|
|
|
|
|
GILARDONI racing minarelli RV3/4/5/6 47mm cylinder kit
|
|
HERE NOW!!
|
|
|
amazing gilardoni 47mm water cooled cylinder kit for minarelli RV3, RV4, RV5, RV6, etc engines!!
MASSIVE w-port exhaust and crazy intake porting!! looks like a total ripper if ya ask me...
|
|
|
|
|
|
|
|
|
|
NOS puch speedometer plastic housing
|
|
HERE NOW!!
|
|
|
new old stock original puch plastic speedometer housing!
puch part #s 328.2.53.523.1 and 359.1.53.022.1 plus the rubber ring and plastic spacer thing.
|
|
|
|
|
|
|
|
|
|
morini M03 M04 clutch friction disk SET
|
|
*sorry none today*
|
|
|
morini M03 M04 replacement clutch friction disk set!!
does not come with steels!! just the friction disks!!
|
|
|
|
|
|
|
|
|
|
MLM vespa piaggio ciao CRAZY high pipe
|
$310.00 alternate reality price $199.99
HERE NOW!!
|
|
|
**now on sale til they are sold out, then we say goodbye... with NO RETURNS** MLM highboy ripper pipe for will's favorite moped. CIAO
|
|
|
|
|
|
|
|
|
|
NOS original cev 40mph speedometer
|
|
HERE NOW!!
|
|
|
new old stock original CEV 40mph speedometer with housing and bracket,
and bulb! party combo!!! found on tomos plus many italian mopeds such as
minarelli, garelli, morini, italjet, cimatti, safari, etc.
60mm diameter!
|
|
|
|
|
|
|
|
|
|
garelli NOI rubber engine mount bushing
|
|
HERE NOW!!
|
|
|
replacement engine / motor mount bushing for garelli NOI and possibly more!!
|
|
|
|
|
|
|
|
|
|
peugeot malossi CDI cover thingy
|
|
HERE NOW!!
|
|
|
just the lil CDI mounting plate cover for the very discontinued peugeot 103 malossi CDI!
25 6841
|
|
|
|
|
|
|
|
|
|
Mitas 70/100-19 or 2.75-19 TERRA FORCE-MX SM Motocross Competition Red Yellow Tire
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
**SUPER CLEARANCE on some 2.75-19 (70/100-19) off road tires...NO RETURNS** Red and yellow stripes = medium hard tread compound for soft to medium terrain.
|
|
|
|
|
|
|
|
|
|
Mitas E-09 2.75-21 knobby ADV trail dirt motorcycle tire
|
$49.99 alternate reality price $41.99
HERE NOW!!
|
|
|
knobby 21 x 2.75 moped or motorcycle tire for off road trail riding and racing on sand dunes n runnin over people you don't like. made by mitas
21 x 2.75
|
|
|
|
|
|
|
|
|
|
OEM tomos MC80 ebr triple tree TOP plate
|
|
HERE NOW!!
|
|
|
OEM tomos MC80 triple tree TOP plate made by EBR!
tomos part number 243487
|
|
|
|
|
|
|
|
|
|
USED original puch maxi N center stand
|
$39.99 alternate reality price $34.99
HERE NOW!!
|
|
|
USED original kickstand for the rigid tail puch maxi N!
about 165mm long!
puch part # 349.5.24.000.2
|
|
|
|
|
|
|
|
|
|
NOS original puch magnum XK center stand
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
new old stock original center kickstand for puch magnum XK! nice original puch quality here!!
about 250mm long
puch part # 321.1.24.800.2
|
|
|
|
|
|
|
|
|
|
tomos OEM streetmate and revival turn signal / horn bracket
|
|
HERE NOW!!
|
|
|
tomos original turn signals and dual horns bracket found on streetmate and revival!!
or just use it on any bike that you want two horns and turn signals on!!
tomos part number 242034
|
|
|
|
|
|
|
|
|
|
NOS puch maxi oil measuring cup - GREY
|
|
HERE NOW!!
|
|
|
NOS oil cup for puch maxi, newport, nostalgia, etc!! this goes under the gas cap and always falls off into your tank, never to be seen again.
puch part # 349.1.22.821.1
|
|
|
|
|
|
|
|
|
|
NOS puch MAXI pedal crank shaft - 220mm - 28t
|
|
HERE NOW!!
|
|
|
new old stock puch maxi pedal shaft originally found on maxi ii and maxi
mk/ii! that means it works with a za50 as well as an e50.
puch part # 321.3.42.601.0
|
|
|
|
|
|
|
|
|
|
OEM vespa piaggio moped stock metal base gasket
|
|
HERE NOW!!
|
|
|
OEM vespa piaggio moped stock 50cc metal base gasket
for all the vespa piaggio mopeds - ciao, bravo, grande, si, boxer and kinetic, tfr, super, luna
piaggio part # 152793
|
|
|
|
|
|
|
|
|
|
NOS vespa piaggio rear variator clutch SHOES - the ones ya want
|
|
HERE NOW!!
|
|
|
 new old stock original piaggio clutch shoe set for variated vespa piaggio mopeds. these are the most common shoes found on stock variated vespa piaggio mopeds such as bravo, grande and SI imported to the USA!
pivot holes are a bit over 7mm !!
|
|
|
|
|
|
|
|
|
|
NOS overbore vespa 38.8mm piston - 12pin
|
|
HERE NOW!!
|
|
|
new old stock vespa piaggio overbore 50cc 38.8mm piston!
for many vespa mopeds, ciao, grande, bravo, SI, kinectic and possibly others.
oh yeah with top dykes ring!
|
|
|
|
|
|
|
|
|
|
NOS sachs PRIMA luggage carrier - orange
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs PRIMA luggage carrier aka book rack!!! perfectooo for a primo restoration!
sachs part # 760 000 997
|
|
|
|
|
|
|
|
|
|
NOS sachs SUBURBAN luggage carrier - red
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs SUBURBAN luggage carrier aka book rack!!! perfectooo for a primo restoration!
sachs part # 760 000 996
|
|
|
|
|
|
|
|
|
|
NOS sachs SUBURBAN luggage carrier - blue
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs SUBURBAN luggage carrier aka book rack!!! perfectooo for a primo restoration!
sachs part # 760 000 995
|
|
|
|
|
|
|
|
|
|
NOS sachs SEVILLE luggage carrier - black
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs SEVILLE luggage carrier aka book rack!!! this rack came on seville models with the single seat and oil
injection!! some sevilles came with a long seat and chrome tubular
luggage carrier!
sachs part # 760 000 896
|
|
|
|
|
|
|
|
|
|
OEM vespa piaggio decomp valve TOP HAT
|
|
HERE NOW!!
|
|
|
OEM little tiny decompression valve TOP HAT for vespa piaggio mopeds!
piaggio part # 113246
|
|
|
|
|
|
|
|
|
|
morini stock 50cc replacement piston - 40.4mm
|
|
HERE NOW!!
|
|
|
morini stock piston!!! 40.4mm with two 1.5mm FG rings, 12mm wrist pin and clips
super nice quality and a drop-in replacement!!
for m01/m02
|
|
|
|
|
|
|
|
|
|
garelli stock DELUXE overbore piston in many sizes
|
|
|
HERE NOW! dlx overbore replacement piston for garelli NOI mopeds and maybe more?
available in multiple overbore sizes ! 40.00mm, 40.4mm, 41.00mm and 42.00mm
|
|
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 564
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 564 type aka 7564
RIGHT side application
2.5mm x 2.5mm cable tip
12mm axle
m10 x 1.00
|
|
|
|
|
|
|
|
|
|
DIY puch e50 straight cut gear set for gurus
|
$199.99 alternate reality price $169.99
HERE NOW!!
|
|
|
new DIY straight cut gears for puch e50! very nice machine work on these plus they are beeeefy.
DIY = do it yourself! if ya have to ask how to do it, you're not ready....gurus only!!
|
|
|
|
|
|
|
|
|
|
NOS batavus M48 encarwi air filter housing
|
|
HERE NOW!!
|
|
|
new old stock original batavus laura M48 air filter housing / air box for the encarwi S type carburetor!!!
batavus part # 481713
|
|
|
|
|
|
|
|
|
|
NOS malossi IPERMATIC 41mm vespa piaggio piston - 12 pin
|
|
HERE NOW!!
|
|
|
new old stock original malossi 41mm replacement piston for the very rare IPERMATIC 55cc cylinder kit!!
12mm wrist pin!
|
|
|
|
|
|
|
|
|
|
jawa babetta type 210 spare parts MANUAL
|
|
HERE NOW!!
|
|
|
very cool yellow spare parts manual for jawa babetta type 210!
time to brush up on your slovak cuz this bad boy ain't in english!
|
|
|
|
|
|
|
|
|
|
jawa 210 accelerating drum
|
|
*sorry none today*
|
|
|
replacement accelerating (clutch) drum for the jawa 210 two speed automatic motor!!
|
|
|
|
|
|
|
|
|
|
OEM honda decal - DRIVE CAUTION
|
|
HERE NOW!!
|
|
|
OEM honda drive caution decal!!
honda part # 87560-422-300
|
|
|
|
|
|
|
|
|
|
honda decal - MARK CAUTION
|
|
HERE NOW!!
|
|
|
honda MARK caution decal in german! how fun!
replaces honda part # 87560-323-611
|
|
|
|
|
|
|
|
|
|
NOS nichiwa spark plug boot - LB05F
|
|
HERE NOW!!
|
|
|
new old stock original NICHIWA spark plug resistor cover boot (5k)!
nichiwa was the OEM supplier for kawasaki and other japanese brands back
in the day! rad!
made in JAPAN!!
|
|
|
|
|
|
|
|
|
|
NOS OEM peugeot 103 stock piston - 2.5mm rings
|
|
|
HERE NOW!!
a stock piston for peugeot made by peugeot!
check within for further dimensions
|
|
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 332
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 332 type aka 7332
LEFT side application
2.00mm x 2.00mm cable tip
11mm axle
m10 x 1.00
|
|
|
|
|
|
|
|
|
|
NOS morini M02 first gear assembly - 59t
|
|
HERE NOW!!
|
|
|
new old stock original morini m02 first gear with 59 teeth!!!. this is for morini two speed motors.
in fact, it is the first speed gear. hehe
oem morini part number 12-0025
|
|
|
|
|
|
|
|
|
|
tomos OEM streetmate R 16" tire party
|
|
|
ADD TO CART TO CHECK STOCK!
a fun-filled tomos OEM replacement 16" tire party pack made SPECIFICALLY for streetmate R!
PLEASE TAKE NOTE : THIS IS FOR STREETMATE R WITH MAGS. IF YOU HAVE A 17" FRONT WHEEL THIS WILL NOT WORK!
|
|
|
|
|
|
|
|
|
|
NOS vespa piaggio SI floor boards - GREY
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original grey floor boards or foot rests for vespa piaggio SI mopeds!
|
|
|
|
|
|
|
|
|
|
NOS black and chrome SEBAC shocks - 300mm
|
|
HERE NOW!!
|
|
|
new old stock super classy, stock like black and chrome shocks by SEBAC!!
made in ITALY!
|
|
|
|
|
|
|
|
|
|
USED sachs VDO 40 mph speedometer / housing assembly
|
|
HERE NOW!!
|
|
|
USED original VDO 40 mph 60mm speedometer complete with housing and mounting bracket for SACHS!
CHROME rim around the top!
1898 miles on the odo!
|
|
|
|
|
|
|
|
|
|
sachs 50/2 50/3 50/4 hercules complete gasket set - v2
|
|
HERE NOW!!
|
|
|
complete gasket set for sachs, hercules and ktm motorbikes with the sachs 50/2, 50/3, and 50/4 engines!
version 2 features some seriously thick cork gaskets!
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 drive gear
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 main drive gear!
77t
sachs part # 0234 151 299
|
|
|
|
|
|
|
|
|
|
NOS derbi variant forks - RED
|
|
HERE NOW!!
|
|
|
new old stock pair of derbi variant forks!
***note these forks are more of a basic RED color instead of the metallic red as shown in the photos.***
comes with a top nut and lower race installed! no speedo bracket, top plate or top race like in the photo sorry.
|
|
|
|
|
|
|
|
|
|
NOS vespa stock piston - 38.4mm - 10 pin
|
|
HERE NOW!!
|
|
|
new old stock original piaggio replacement piston assembly for many different mopeds!! keep it original!
38.4mm diameter
10mm wrist pin
piaggio part # 0/196115/00
|
|
|
|
|
|
|
|
|
|
NOS vespa stock piston - 38.6mm - 10 pin
|
|
HERE NOW!!
|
|
|
new old stock original piaggio replacement piston assembly for many different mopeds!! keep it original!
38.6mm diameter
10mm wrist pin
piaggio part # 0/196116/00
|
|
|
|
|
|
|
|
|
|
NOS motobecane rear book rack - yellow
|
|
HERE NOW!!
|
|
|
NOS motobecane rear book rack for 40v and 50v in yellow... youre gonna wanna see more of this bud trust me..
|
|
|
|
|
|
|
|
|
|
puch DART headlight housing/shroud - CHROME
|
|
HERE NOW!!
|
|
|
CHROME plastic headlight shroud for the puch dart! it's also referred to as the mini maxi in other countries. yay!
|
|
|
|
|
|
|
|
|
|
garelli VIP stock exhaust pipe - version 2
|
|
HERE NOW!!
|
|
|
stock exhaust pipe thingy for your garelli VIP! it's a little guy. one piece, with the header welded to the muffler/baffle/pancake thing. stinger shoots out the left side!
|
|
|
|
|
|
|
|
|
|
USED motobecane le moped 6 star mag HUB - NUDE
|
$69.99 alternate reality price $44.99
HERE NOW!!
|
|
|
new old stock original motobecane front hub for the le moped 6 star mag wheels!!
part of motobecane part # 24269
|
|
|
|
|
|
|
|
|
|
tomos OEM master cylinder gasket INSERT for '02-04 revival
|
|
HERE NOW!!
|
|
|
tomos OEM master cylinder for the '01-03 revival master cylinder assembly!!
diagram above!
tomos part number 232852
|
|
|
|
|
|
|
|
|
|
NOS vespa piaggio 50cc stock head for CIAO
|
|
HERE NOW!!
|
|
|
new old stock original 50cc cylinder head for vespa piaggio CIAO mopeds!!
does not come with a decomp valve assembly!
piaggio part # 124533
|
|
|
|
|
|
|
|
|
|
NOS nude derbi REAR brake plate - SILVER
|
|
*sorry none today*
|
|
|
NOS derbi rear brake plate totally nude for piston port and pyramid reed derbi variant!
note
that this does have the cast in perch that holds the cable outer! you can use it for front or rear i think!! score!
|
|
|
|
|
|
|
|
|
|
NOS vespa piaggio EURO bravo long black seat
|
|
HERE NOW!!
|
|
|
new old stock long black seat for euro vespa piaggio bravo! it's square
post, unlike the round post bravos commonly found in the USA.
16" long
x 7" wide x
about 4" tall
seat post is 24mm x 38mm
|
|
|
|
|
|
|
|
|
|
NOS atala spongy rubber block seat
|
|
HERE NOW!!
|
|
|
ask me no questions, atala no lies
ok gettin better gettin better
nerf-ball-like seat with flop up bracket
|
|
|
|
|
|
|
|
|
|
NOS sachs seville OIL injection pump
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs seville oil injection unit!!! now you can
finally have that oil injected sachs seville that you've always dreamed
of!
|
|
|
|
|
|
|
|
|
|
NOS nude derbi REAR brake plate - BLACK
|
|
HERE NOW!!
|
|
|
NOS derbi rear brake plate totally nude for piston port and pyramid reed derbi variant!
note
that this does not have the cast in perch that holds the cable outer!
it's meant for rear use only on piston port / pyramid variant that
utilizes the long steel brake cable bracket.
|
|
|
|
|
|
|
|
|
|
NOS nude derbi REAR brake plate - SILVER
|
|
HERE NOW!!
|
|
|
NOS derbi rear brake plate totally nude for piston port and pyramid reed derbi variant!
note
that this does not have the cast in perch that holds the cable outer!
it's meant for rear use only on piston port / pyramid variant that
utilizes the long steel brake cable bracket.
|
|
|
|
|
|
|
|
|
|
mystery prolly french forks in burnt orange
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
mystery?!?!? forks?1?!? yeah we don't know what these belong to, but they are burnt orange and very french looking. flandria? they kinda look like wards riverside forks but definitely are NOT those.
26mm thread
200mm steerer tube length
570mm OAL
|
|
|
|
|
|
|
|
|
|
USED peugeot VEGLIA speedometer drive
|
$39.99 alternate reality price $26.99
HERE NOW!!
|
|
|
used ORIGINAL VEGLIA speedometer drive for peugeot!!
these are NOT frozen and spin freely! you'll wanna clean it and get some lube in there before running it.
peugeot part # 46709
|
|
|
|
|
|
|
|
|
|
OEM honda tank decal - red / white
|
|
HERE NOW!!
|
|
|
honda tank decal originally for the ____________(we don't know yet
but will soon), but use it on whatever. its super nice OEM quality and
actually a decal as opposed to a sticker!
honda part # 87123-149-840ZC
|
|
|
|
|
|
|
|
|
|
OEM honda MT50 decal - CAUTION label
|
|
HERE NOW!!
|
|
|
OEM honda decal! for MT50 but probably also found on many different
mopeds n motorcycles made by honda. hobbits, expresses, urban expresses,
etc. perfect for your honda restoration!!
honda part # 87505-167-610
|
|
|
|
|
|
|
|
|
|
OEM honda decal - HONDA MOTOR CO
|
|
HERE NOW!!
|
|
|
OEM honda decal! found on many different mopeds, scooters, motorcycles AND cars made by honda! for your honda restoration!!
honda part # 87125-041-680
|
|
|
|
|
|
|
|
|
|
OEM honda preserve nature decal
|
|
HERE NOW!!
|
|
|
OEM honda decal! found on many different late 70's and early 80's honda motorcycles!!
honda part # 87560-375-680ZF
|
|
|
|
|
|
|
|
|
|
OEM honda decal - HONDA MOTOR CO
|
|
HERE NOW!!
|
|
|
OEM honda decal! found on many different mopeds, scooters, motorcycles AND cars made by honda! for your honda restoration!!
honda part # 87125-001-600
|
|
|
|
|
|
|
|
|
|
HPI mini rotor fan for zundapp / kreidler
|
|
HERE NOW!!
|
|
|
HPI mini rotor fan for forced induction engines found on certain kreidler and zundapp models!! also for crafty hackers that wanna be cool. literally. more info within.
|
|
|
|
|
|
|
|
|
|
USED vespa bravo gas tank - PLASTIC
|
|
HERE NOW!!
|
|
|
USED vespa bravo plastic gas tank! these are super rare, as they only came on the 1976 and earlier bravos.
|
|
|
|
|
|
|
|
|
|
NOS maybe garelli DUCATI 2 wire cdi ignition
|
|
HERE NOW!!
|
|
|
new old stock original DUCATI energia CDI stator and flywheel for......i'm not sure exactly. I think this may be for the late model garelli team 1 speed engine?!?
more info within....
|
|
|
|
|
|
|
|
|
|
tomos OEM YELLOW gas tank for the LX and targa
|
|
HERE NOW!!
|
|
|
original OEM tomos yellow gas tank for the LX and targa mopeds!
|
|
|
|
|
|
|
|
|
|
OEM honda tank decal - black / silver
|
|
HERE NOW!!
|
|
|
honda tank decal originally for the ____________(we don't know yet
but will soon), but use it on whatever. its super nice OEM quality and
actually a decal as opposed to a sticker!
part number 87123-149-840za
|
|
|
|
|
|
|
|
|
|
OEM honda decal - HELMET HOLDER
|
|
HERE NOW!!
|
|
|
"HELMET HOLDER" decal - oem part number 87511-323-670
|
|
|
|
|
|
|
|
|
|
garelli VIP stock exhaust pipe - version 4 - no header
|
|
HERE NOW!!
|
|
|
stock exhaust pipe thingy for your garelli VIP! it's a little guy.
version 4
|
|
|
|
|
|
|
|
|
|
NOS OEM Puch LEFT side pedal arm
|
|
HERE NOW!!
|
|
|
NOS OEM puch left side pedal!!!
|
|
|
|
|
|
|
|
|
|
NOS trac 415 rear sprocket - 46T
|
|
HERE NOW!!
|
|
|
new old stock original TRAC rear sprocket!! i believe this is for trac models using the laura M56 engine, not the daelim engine.
40mm ID
415 chain size
46t
62mm BCD
|
|
|
|
|
|
|
|
|
|
EBR steerer tube for hackerz - 25mm
|
|
HERE NOW!!
|
|
|
EBR steerer tube for racers, hackerz and hydraulic press operators !! great for doing cool stuff like tapered headset bearing conversions n such...
25mm x 1mm threading
25mm OD
240mm overall length
|
|
|
|
|
|
|
|
|
|
deluxe quality 25mm fork LOCK nut - stainless steel
|
|
HERE NOW!!
|
|
|
beautiful stainless steel top lock nut for many different bikes that use 25mm threading steerer tubes!! for motobecane, peugeot...im sure there are more.
25mm x 1mm thread
37.25mm OD
5.5mm thick
|
|
|
|
|
|
|
|
|
|
deluxe quality 25mm top fork nut - stainless steel
|
|
HERE NOW!!
|
|
|
truly for aficionados of luxury goods only we present this 25mm x 1mm thread stainless steel top nut for moby, peugeot, hobbit n more!
|
|
|
|
|
|
|
|
|
|
stainless steel headset dust cover for puch n more - 26mm
|
|
HERE NOW!!
|
|
|
headset dust cover for puch magnum, freespirit, series b n tomos!! this
kinda hides the headset n makes things look more sleek...a dresser piece of sorts. check the
measurements below to make sure that you'll have the proper clearance
though!!
for 26mm steerer tubes
|
|
|
|
|
|
|
|
|
|
NOS vintage rear fender - primer
|
|
HERE NOW!!
|
|
|
mystery vintage rear fender for 16" or 17" wheels off a...moped....
|
|
|
|
|
|
|
|
|
|
peugeot 103 style LELEU front 80mm brake plate
|
|
HERE NOW!!
|
|
|
leleu style front brake plate for PEUGEOT 103SP, MVL and others. for use with leleu wheels and five star hubs!
12mm axle!!
does not come with brake shoes!
|
|
|
|
|
|
|
|
|
|
NOS peugeot VEGLIA speedometer drive
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock ORIGINAL VEGLIA speedometer drive for peugeot!!
these are NOT frozen and spin freely! you'll probably wanna try and get some lube in there before running it.
peugeot part # 46709
|
|
|
|
|
|
|
|
|
|
magura style grip SHIFTER - 2 speed - black
|
|
*sorry none today*
|
|
|
magura style 2 speed shifter for puch, zundapp and sachs mopeds and
motorbikes. this is a universal 2 speed shifter you can use on any bike
you want.
|
|
|
|
|
|
|
|
|
|
magura style left brake lever assembly - herclues n kreidler
|
|
HERE NOW!!
|
|
|
new magura style left side lever assembly for any 7/8" or 22mm
handlebars!! this specific model is for some euro market hercules and
kreidler mopeds since it has an integrated mount for puch magnum
magura/merit style rectangular switches!!
|
|
|
|
|
|
|
|
|
|
magura style old timer lever assembly SET - grey
|
|
HERE NOW!!
|
|
|
magura style replacement brake lever assemblies + throttle + grips for your old timer moped!!
these
are very universal and can be used on whatever ya want! they are
specifically for euro market zundapp 510, 514 and 515 models.
|
|
|
|
|
|
|
|
|
|
NOS motobecane tool pouch seat COVER
|
|
HERE NOW!!
|
|
|
new old stock original motobecane single seat COVER!! this one features a
rubber seat cover with integrated tool pouch in the rear. how cool is
that?!?!?!
just the seat cover!!
|
|
|
|
|
|
|
|
|
|
magura style grip SHIFTER - 3 speed
|
|
HERE NOW!!
|
|
|
magura style 3 speed shifter for puch, zundapp and sachs mopeds and
motorbikes. this is a universal 3 speed shifter you can use on any bike
you want!
|
|
|
|
|
|
|
|
|
|
NOS vintage front fender - chrome
|
|
HERE NOW!!
|
|
|
NOS mystery vintage front fender for 16" or 17" wheels off a...moped....
about 21.5" from start to end...
a little under 3" wide
|
|
|
|
|
|
|
|
|
|
NOS peugeot VEGLIA speedometer drive - FROZEN
|
$24.99 alternate reality price $14.99
HERE NOW!!
|
|
|
new old stock ORIGINAL VEGLIA speedometer drive for peugeot!!
***this
is in good shape but it is FROZEN! if you have the patience and skill
to fix it, you will be rewarded with a working drive. wow!***
peugeot part # 46709
|
|
|
|
|
|
|
|
|
|
tomos A55 side cover mounting hardware PACK - complete
|
|
|
ADD TO CART TO CHECK STOCK!
OEM tomos side cover mounting hardware pack for A55 engines!!
complete set with the spacers n such!
|
|
|
|
|
|
|
|
|
|
tomos A55 side cover mounting SCREW set
|
|
|
ADD TO CART TO CHECK STOCK!
OEM tomos side cover mounting screw set for A55 engines!!
just the screws, washers and NUT!
|
|
|
|
|
|
|
|
|
|
MYSTIK oil NON-DETERGENT - 10w
|
|
HERE NOW!!
|
|
|
MYSTIK brand non-detergent 10 weight motor oil!! for minarelli v1, garelli, morini, n more. demm? probably.
|
|
|
|
|
|
|
|
|
|
MYSTIK oil NON-DETERGENT - 20w
|
|
HERE NOW!!
|
|
|
MYSTIK brand non-detergent 20 weight motor oil!! for minarelli v1, garelli, morini, n more. demm? probably.
|
|
|
|
|
|
|
|
|
|
MYSTIK oil NON-DETERGENT - 30w
|
|
HERE NOW!!
|
|
|
MYSTIK brand non-detergent 30 weight motor oil!! for minarelli v1, garelli, morini, n more. demm? probably.
|
|
|
|
|
|
|
|
|
|
NKE austria 6203 NR snap ring bearing
|
|
HERE NOW!!
|
|
|
clutch side crankshaft bearing for the e50
6203 NR c3 clearance by NKE STEYR aka the OE supplier for puch!!!
made in the motherland....AUSTRIA
|
|
|
|
|
|
|
|
|
|
OEM tomos a55 side cover mounting BOLT - m6 x 25mm
|
|
HERE NOW!!
|
|
|
OEM tomos M6 button head bolt! this is one of the sidecover mounting bolts found on A55 powered tomos models!!
tomos part # 026692
|
|
|
|
|
|
|
|
|
|
OEM tomos a55 side cover mounting BOLT - m6 x 50mm
|
|
HERE NOW!!
|
|
|
OEM tomos M6 button head bolt! this is one of the sidecover mounting bolts found on A55 powered tomos models!!
tomos part # 026696
|
|
|
|
|
|
|
|
|
|
OEM tomos a55 side cover mounting BOLT - m6 x 16mm
|
|
HERE NOW!!
|
|
|
OEM tomos M6 button head bolt! this is one of the sidecover mounting bolts found on A55 powered tomos models!!
tomos part # 026696
|
|
|
|
|
|
|
|
|
|
OEM tomos A55 stock 50cc head
|
|
*sorry none today*
|
|
|
original tomos A55 38mm 50cc head
|
|
|
|
|
|
|
|
|
|
NOS tomos old-style SILVER handlebar clamp - TOP
|
|
HERE NOW!!
|
|
|
new old stock TOP handlebar clamp for ollllddddd tomos A3 models.
|
|
|
|
|
|
|
|
|
|
NOS tomos old-style SILVER handlebar clamp - BOTTOM
|
|
HERE NOW!!
|
|
|
new old stock BOTTOM handlebar clamp for ollllddddd tomos A3 models.
these are kinda cool since they are effectively bar risers with built in
setback!
m8 bolt cast in!
|
|
|
|
|
|
|
|
|
|
USED tomos old-style SILVER handlebar clamp - BOTTOM
|
$24.99 alternate reality price $14.99
HERE NOW!!
|
|
|
USED original BOTTOM handlebar clamp for ollllddddd tomos A3 models.
these are kinda cool since they are effectively bar risers with built in
setback!
m8 bolt cast in!
|
|
|
|
|
|
|
|
|
|
USED tomos old-style SILVER handlebar clamp - TOP
|
$12.99 alternate reality price $7.99
HERE NOW!!
|
|
|
USED original TOP handlebar clamp for ollllddddd tomos A3 models.
|
|
|
|
|
|
|
|
|
|
NOS trac daelim DM50 case gasket
|
|
HERE NOW!!
|
|
|
new old stock original TRAC case gasket! this is for the DM50 engines, not the DP50 or M56!!
trac part # 12011
daelim part # 11191-002-890
|
|
|
|
|
|
|
|
|
|
NOS solo plastic drive PULLEY - 11t
|
|
HERE NOW!!
|
|
|
NOS original plastic drive PULLEY for your solo!! this is for the single speed models!
11t drive sprocket!!
solo part # 34-00-142
|
|
|
|
|
|
|
|
|
|
USED solo plastic drive PULLEY - 11t
|
$49.99 alternate reality price $29.99
HERE NOW!!
|
|
|
USED original plastic drive PULLEY for your solo!! this is for the single speed models!
11t drive sprocket!!
solo part # 34-00-142
|
|
|
|
|
|
|
|
|
|
NOS garelli handlebar clamp - v2
|
|
HERE NOW!!
|
|
|
NOS Garelli chrome handlebar clamp!!
Garelli part number: 507652.2.122
|
|
|
|
|
|
|
|
|
|
NOS domino throttle perch - 001
|
|
HERE NOW!!
|
|
|
NOS domino throttle perch. very nice and classy. good to replace your old one that is wallered out!
this style came on a few bikes over the years.
|
|
|
|
|
|
|
|
|
|
vespa piaggio lighting wire SOCKET
|
|
HERE NOW!!
|
|
|
replacement plastic lighting wire socket / connector thing that mounts to the engine case on all vespa piaggio mopeds!
|
|
|
|
|
|
|
|
|
|
vespa piaggio ignition wire rubber BOOT
|
|
*sorry none today*
|
|
|
replacement rubber ignition wire BOOT thing that mounts to the engine
case on all vespa piaggio mopeds! keep the elements outta yer ciao
engine man!
i think these were mainly used on ciao PX and other euro engines...
|
|
|
|
|
|
|
|
|
|
vespa piaggio brake lever RETURN spring for metal levers
|
|
HERE NOW!!
|
|
|
replacement brake lever return spring for vespa piaggio mopeds with
metal levers....i can't say i've personally seen this long boy before,
but maybe you have? perhaps they are found on really old vespas? idk!!
check within for dimensions!
|
|
|
|
|
|
|
|
|
|
OEM vespa piaggio rubber cable & wire strap
|
|
HERE NOW!!
|
|
|
original rubber strap for many uses... came on lots of vespa piaggio mopeds and scooters! I love this little thing its soo cool! make your CUztom look sharp and pro-like OEM original style... yeaaa
|
|
|
|
|
|
|
|
|
|
NOS derbi rd50 laguna c5 throttle
|
|
HERE NOW!!
|
|
|
new old stock derbi rd50 / c5 / c4 / laguna throttle! made by IDEAL in spain
for all 22mm or 7/8th in bars!
|
|
|
|
|
|
|
|
|
|
tomos OEM old-style black handlebar clamp - TOP
|
$9.99 alternate reality price $7.49
HERE NOW!!
|
|
|
this is the old style TOP handlebar clamp for bullet and super tom!
|
|
|
|
|
|
|
|
|
|
OEM honda decal - TRANSPORTING info
|
|
HERE NOW!!
|
|
|
OEM honda decal! found on many different mopeds n motorcycles made by
honda. hobbits, expresses, urban expresses, etc. perfect for your honda
restoration!!
honda part # 87509-147-670ZA
|
|
|
|
|
|
|
|
|
|
OEM honda NU50 urban express RIGHT side KILL switch
|
|
HERE NOW!!
|
|
|
OEM replacement RIGHT side handlebar switch assembly!! off / run / off switch! the decompression lever mounts to the bottom of this (not included). specifically for the NU50 urban express, but essentially identical to the one found on pa50, nc50, na50 and nx50!
honda part # 35130-gc1-671
|
|
|
|
|
|
|
|
|
|
OEM honda NU50 urban express turn signal horn switch assembly
|
|
HERE NOW!!
|
|
|
OEM honda NU50 urban express turn signal horn assembly with wires!! specifically for
the NU50 urban express, but essentially identical to the one found on
pa50, nc50, na50 and nx50! the only difference is that this has a
rectangular connector instead of loose bullet connectors on the wire
leads.
honda part # 35200-GC1-671
|
|
|
|
|
|
|
|
|
|
OEM honda express NC50 rear shock UPPER lock nut
|
|
HERE NOW!!
|
|
|
OEM upper lock nut for 1983 NC50 express rear shocks! may fit other years and models as well!!
honda part # 52481-001-030
|
|
|
|
|
|
|
|
|
|
OEM honda MB5 oil pump line
|
|
HERE NOW!!
|
|
|
OEM honda MB5 and SB50 elite 50 oil pump line!!
honda part # 15525-166-000
|
|
|
|
|
|
|
|
|
|
OEM honda NCZ50 motocompo oil tank CAP
|
|
HERE NOW!!
|
|
|
OEM honda NCZ50 motocompo oil injection tank rubber cap!!
honda part # 55106-GC6-000
|
|
|
|
|
|
|
|
|
|
OEM honda nc50 express LEFT foot peg plastic cover - PARAKEET YELLOW
|
|
HERE NOW!!
|
|
|
OEM honda nc50 express foot peg assembly plastic cover! in PARAKEET YELLOW!! good job PARAKEET!
LEFT side
|
|
|
|
|
|
|
|
|
|
OEM honda nc50 express LEFT foot peg plastic cover - MARS ORANGE
|
|
*sorry none today*
|
|
|
OEM honda nc50 express foot peg assembly plastic cover! in MARS ORANGE!! good job elon!
LEFT side
|
|
|
|
|
|
|
|
|
|
OEM honda MB5 reed valve assembly
|
|
HERE NOW!!
|
|
|
OEM new old stock original honda reed block / reed valve for honda MB5!
should also fit MBX, MB50, MB80, MT50, MT80, MTX50, MTX80...
honda part # 14100-166-003
|
|
|
|
|
|
|
|
|
|
OEM honda decal - CAUTION label
|
|
HERE NOW!!
|
|
|
OEM honda decal! for 1977-1980 NC50 express but probably also found on
many different mopeds n motorcycles made by honda. hobbits, expresses,
urban expresses, etc. perfect for your honda restoration!!
honda part # 87505-147-670
|
|
|
|
|
|
|
|
|
|
OEM honda NA50 express II seat hinge PIN
|
|
HERE NOW!!
|
|
|
OEM seat hinge pin for honda NA50 express II!
honda part # 90101-163-000
|
|
|
|
|
|
|
|
|
|
OEM honda NA50 express II seat cushion SPRING
|
|
HERE NOW!!
|
|
|
OEM seat cushion SPRING for honda NA50 express II! boing!!!
honda part # 77127-148-000
|
|
|
|
|
|
|
|
|
|
OEM honda hobbit PA50I air box rubber TUBE
|
|
*sorry none today*
|
|
|
OEM honda hobbit pa50I rubber air box tube aka dongle. a critical piece
in exacting the airflow to optimize the power of your bone stock 20mph
pa50I!
honda part # 17211-148-680
|
|
|
|
|
|
|
|
|
|
OEM honda express NC50 NA50 headlight bezel - parakeet YELLOW
|
$149.99 alternate reality price $99.99
*sorry none today*
|
|
|
new old stock original honda parakeet YELLOW headlight bezel for NC50 express and NA50 express II!
honda part # 33101-147-671ZC
|
|
|
|
|
|
|
|
|
|
OEM honda PA50I movable drive face
|
|
HERE NOW!!
|
|
|
new old stock OEM honda PA50I drive face, movable (aka variator body)!
honda part # 22110-148-701
|
|
|
|
|
|
|
|
|
|
OEM honda hobbit pa50 pedal engagement LEVER
|
|
HERE NOW!!
|
|
|
OEM honda hobbit pa50i, pa50ii, camino, etc. rear transmission / gearbox pedal engagement lever!!
honda part # 24411-148-000
|
|
|
|
|
|
|
|
|
|
OEM honda nc50 express decal - blue n yellow
|
|
HERE NOW!!
|
|
|
OEM honda blue n yellow decal for NC50 express! might be on some other expresses as well???!
35mm x 125mm
honda part # 87125-147-710
|
|
|
|
|
|
|
|
|
|
OEM honda hobbit and na50 RIGHT side KILL switch
|
|
HERE NOW!!
|
|
|
OEM replacement RIGHT side handlebar switch assembly!! off / run / off
switch! the decompression lever mounts to the bottom of this (not
included). these are found on honda hobbit (all years) and na50 express 2
as well!! these are also found on nc50 express and many other bikes!!
honda part # 35200-148-671, 35130-GB7-671 and 35200-163-671
|
|
|
|
|
|
|
|
|
|
OEM honda front fender splash guard mud flap for NC50 and NA50
|
|
*sorry none today*
|
|
|
OEM honda NC50 and NA50 front fender mud flap. this is genuine honda OEM rubber quality. no more wet pant legs, i tell you what!
honda part # 61105-147-000 or 61105-147-010
|
|
|
|
|
|
|
|
|
|
OEM honda express II NA50 front RACK
|
|
HERE NOW!!
|
|
|
OEM new old stock replacement front rack for 1979-1981 honda express II NA50!
honda part # 81100-163-000
|
|
|
|
|
|
|
|
|
|
OEM honda NA50 express II turn signal horn assembly with wires
|
|
HERE NOW!!
|
|
|
OEM honda NA50 express II turn signal horn assembly with wires!! this is
1980 NA50 but probably fits a bunch of other mopeds too!!
honda part # 35200-163-771
|
|
|
|
|
|
|
|
|
|
OEM honda express NC50 front fender - WHITE
|
|
HERE NOW!!
|
|
|
OEM new old stock ceramic WHITE perfect condition and rare honda nc50 express front fender. yes you heard that right.
honda part # 61101-147-000ZF
|
|
|
|
|
|
|
|
|
|
vespa polini OVERBORE piston - 12pin - 46.4mm
|
|
HERE NOW!!
|
|
|
polini overbore dual ring piston for the vespa polini 46mm kit!
12mm wrist pin variety
|
|
|
|
|
|
|
|
|
|
Mitas MC35 s-racer 2.0 scooter tire - 100/90-12
|
|
HERE NOW!!
|
|
|
scooty tire for knee-draggin pro racers or even just the average joe...i mean, not that all joes are average...
|
|
|
|
|
|
|
|
|
|
Mitas 100/70-14 TOURING FORCE-SC Scooter Commuting Reinforced 53L Tire
|
$64.20 alternate reality price $42.99
HERE NOW!!
|
|
|
The unique tread compound using end-functionalized S-SBR elastomers together with high active reinforcing filler in combination with special resins, is a guarantee for high grip in wet and dry conditions....wow.
|
|
|
|
|
|
|
|
|
|
mitas MC32 Sport moped & motorcycle tire - 100/80-17 + sipes
|
|
HERE NOW!!
|
|
|
mitas premier all season tire!!! super aggressive. deep grooves for slush ejecting, water drainage and solid tracking with excellent handling characteristics in low temperatures on wet or dry surfaces. this is the version with extra sipes!
|
|
|
|
|
|
|
|
|
|
mitas H-06 moped and motorcycle tire - 3.25-16
|
|
HERE NOW!!
|
|
|
a wise choice for street riding, commuting, road rippin n dippin! simple long lasting design for daily use!
|
|
|
|
|
|
|
|
|
|
sava MC20 MONSUM scooter tire - 90/90-12
|
|
HERE NOW!!
|
|
|
this tread is often used for crappy city streets, flat track, and other fun dirt pursuits
|
|
|
|
|
|
|
|
|
|
sava MC20 MONSUM scooter tire - 3.50-10 - WHITE WALL edition
|
|
HERE NOW!!
|
|
|
3.50" wide, rated 51P, white wall edition!
|
|
|
|
|
|
|
|
|
|
dellorto PHBG 19mm RS race carburetor - SPECIAL edition
|
|
HERE NOW!!
|
|
|
new dellorto 19mm PHBG RS special 90th anniversary edition race carburetor!! compared to a standard PHBG, among many other improvements, the 90th edition
boasts an air flow increase of 15%, more prompt delivery
thanks to a new shape of the venturi, a new anti-friction treatment in
Teflon of the throttle valve and a chromed Avional mixture chamber cover as well as an engraved float bowl.
|
|
|
|
|
|
|
|
|
|
NOS vespa SINGLE speed gearbox - 14:1 ratio
|
$79.99 alternate reality price $69.99
HERE NOW!!
|
|
|
new old stock non variated vespa gearbox. for all vespa piaggio mopeds!
ciao, bravo, grande, si, boxer.
comes with all seen here!
14:1 ratio
|
|
|
|
|
|
|
|
|
|
NOS vespa SINGLE speed gearbox - 6:1 ratio
|
$79.99 alternate reality price $59.99
HERE NOW!!
|
|
|
new old stock non variated vespa gearbox. for all vespa piaggio mopeds!
ciao, bravo, grande, si, boxer.
comes with all seen here!
around 6:1 ratio...some say 6.5:1, some say 6.75:1!!!
|
|
|
|
|
|
|
|
|
|
batavus M48 dellorto 15mm SHA upgrade PACK
|
|
|
HERE NOW!!
upgrade party pack for your batavus moped equipped with a laura m48
engine! this allows you to ditch the stock encarwi carb for a much
simpler, larger and more readily available dellorto 15:15 cable choke
carb!
|
|
|
|
|
|
|
|
|
|
motomatic batavus M48 airsal 43.5mm 60cc cylinder
|
|
|
HERE NOW!
ohhh nooo the world is changing before our very eyes ohh nooo !
|
|
|
|
|
|
|
|
|
|
USED honda hobbit black side cover - right side
|
|
HERE NOW!!
|
|
|
USED black plastic side cover for the right side. has a cutaway on the top above the pedal shaft for some reason?
|
|
|
|
|
|
|
|
|
|
dellorto PHBG 17.5mm AD carburetor
|
$114.99 alternate reality price $76.72
HERE NOW!!
|
|
|
***OLD STYLE CAP DISCO DEAL***
the AD edition of PHBG carbs are the similar the AS or CS clamp style but they have the idle and mixture screws on the other side.
17.5mm - clamp style - cable choke - idle and mixture on opposite side
|
|
|
|
|
|
|
|
|
|
dellorto PHBG 20mm DS carburetor
|
|
HERE NOW!!
|
|
|
***OLD STYLE CAP DISCO DEAL***
20mm - spigot style - pull choke
|
|
|
|
|
|
|
|
|
|
used puch magnum X swingarm!
|
$105.00 alternate reality price $44.99
HERE NOW!!
|
|
|
USED magnum X swingarm! in case ya broke yours cause its a CHILDRENS dirt bike and you're n adult.
|
|
|
|
|
|
|
|
|
|
honda hobbit malossi PHBG carburetor kit
|
|
HERE NOW!!
|
|
|
honda hobbit and PA50 carburetor upgrade kit -- 21mm dellorto PHBG with intake, carb and filter + goodies!
|
|
|
|
|
|
|
|
|
|
vespa piaggio POLINI variated evolution GEARBOX
|
|
HERE NOW!!
|
|
|
NEW polini evolution racing variated gearbox for vespa piaggio mopeds!
polini part # 170.0309
|
|
|
|
|
|
|
|
|
|
vespa piaggio POLINI variated gears - 10t / 47t
|
|
HERE NOW!!
|
|
|
new POLINI racing gears for variated vespa piaggio mopeds!!
47t on the single gear!
10t on the small (double) gear!
polini part # 202.1426
|
|
|
|
|
|
|
|
|
|
vespa piaggio POLINI variated gears - 11t / 46t
|
|
HERE NOW!!
|
|
|
new POLINI racing gears for variated vespa piaggio mopeds!!
46t on the single gear!
11t on the small (double) gear!
polini part # 202.1427
|
|
|
|
|
|
|
|
|
|
vespa piaggio POLINI variated gears - input shaft
|
|
HERE NOW!!
|
|
|
new POLINI racing gears for variated vespa piaggio mopeds!!
11t input shaft and 23t idler gear!
polini part # 202.1425
|
|
|
|
|
|
|
|
|
|
vespa piaggio polini FOR RACE exhaust
|
|
*sorry none today*
|
|
|
new polini FOR RACE performance exhaust for vespa piaggio mopeds!
this is specifically for the new 4 stud polini cylinder kit!!
|
|
|
|
|
|
|
|
|
|
SLAMMED single seat - NO LOGO - DADS LEATHER JACKET
|
|
HERE NOW!!
|
|
|
attention lowryda'z, dont tell me you havent tried to do this to a stock maxi seat...yes, its annoying but ends up looking sick...
well, heres a brand new thin, super low, bmx style maxi seat for allllll oh yes finally
NO logo on the back and in a new special color in preparation for all the fun of the year 2020 DADS LEATHER JACKET color
|
|
|
|
|
|
|
|
|
|
NOS charmo vespa piaggio 60cc 41mm cylinder kit - 10mm wrist pin
|
$74.99 alternate reality price $49.99
*sorry none today*
|
|
|
NOS charmo 41mm 60cc 10 pin cast iron cylinder kit
|
|
|
|
|
|
|
|
|
|
USED puch E50 cases
|
$99.99 alternate reality price $89.99
HERE NOW!!
|
|
|
USED puch E50 cases with just one m7 cylinder stud..interesting
|
|
|
|
|
|
|
|
|
|
NOS batavus laura M48 engine MOUNT - complete
|
|
HERE NOW!!
|
|
|
new old stock batavus laura M48 engine mount!
doesn't come with belt tensioner assembly.
batavus part # 10342
|
|
|
|
|
|
|
|
|
|
USED batavus laura M48 engine MOUNT bracket - incomplete
|
|
HERE NOW!!
|
|
|
USED batavus laura M48 engine mount bracket!
comes with belt tensioner assembly!
part of batavus part # 10342
|
|
|
|
|
|
|
|
|
|
USED batavus + trac laura M56 engine
|
|
HERE NOW!!
|
|
|
USED batavus laura + trac daelim m56 engine!
***this engine has a
complete bosch ignition, but it's a bit crusty. crankshaft is locked up
but the internals spin freely. complete minus clutch stuff! great for
parts!***
|
|
|
|
|
|
|
|
|
|
NOS sears puch 190 x 2.50 spokes for 17" wheels - set of 12
|
|
HERE NOW!!
|
|
|
new old stock original sears replacement spokes n nipples for puch 17" spoke wheels!!
these measure 190mm long and 2.5mm in diameter w/ 10mm of threading on the end
you get 12 spokes and 12 nipples!!
|
|
|
|
|
|
|
|
|
|
tomos OEM individual spoke and nipple pair - 153mm
|
|
HERE NOW!!
|
|
|
you get:
ONE spoke
ONE nipple
153mm length spoke! 2.8mm diameter
for 76-91 silver and golden bullet and TT classic!
tomos part number 219135
|
|
|
|
|
|
|
|
|
|
NOS batavus + trac laura M56 engine
|
|
HERE NOW!!
|
|
|
new old stock batavus laura + trac daelim m56 engine!
***this
engine is new old stock, but missing lots o stuff. no ignition or clutch
stuff! crankshaft turns over smoothly, but the flywheel side taper and
threads are a bit mangled from some idiot trying to remove the flywheel.
crank can be cleaned up with a thread file and sanding and polishing of
the taper***
|
|
|
|
|
|
|
|
|
|
USED batavus + trac laura M56 engine
|
|
HERE NOW!!
|
|
|
USED batavus laura + trac daelim m56 engine!
***this engine has a
complete bosch stator that's in great shape! crankshaft is rusty and
doesn't turn easily but the internals spin freely. no clutch stuff!
great for parts!***
|
|
|
|
|
|
|
|
|
|
USED batavus + trac laura M56 engine
|
|
HERE NOW!!
|
|
|
USED batavus laura + trac daelim m56 engine!
***this engine is
missing the cutch stuff and ignition. crankshaft is in good shape and
turns over smoothly, but will need crankshaft bearings! internals spin
smoothly! ***
|
|
|
|
|
|
|
|
|
|
NOS trac daelim DP50 DM50 clutch cover gasket
|
|
HERE NOW!!
|
|
|
new old stock original TRAC clutch cover gasket! this is for the DP50 and DM50 engines, not the M56!!
trac part # 10015
daelim part # 11393-002-890
|
|
|
|
|
|
|
|
|
|
Yuasa yamaha QT50 6v battery - 6N4-2A-5
|
|
HERE NOW!!
|
|
|
Yuasa replacement 6 volt battery for the QT50! 6N4-2A-5
|
|
|
|
|
|
|
|
|
|
NOS original puch spoke NIPPLE
|
|
HERE NOW!!
|
|
|
new old stock OEM puch nipple for original puch 2.50mm spoked wheels! yes finally you can restore that old spoke wheel!
puch part # 349.1.40.031.1
|
|
|
|
|
|
|
|
|
|
NOS puch maxi plastic shock cover - grey
|
|
HERE NOW!!
|
|
|
NOS puch maxi plastic rear shock upper cover in grey!
puch part # 349.2.21.553.1
|
|
|
|
|
|
|
|
|
|
NOS grimeca 118mm brake plate - complete
|
|
HERE NOW!!
|
|
|
new old stock original grimeca 118mm brake plate complete with pads!
found on italian tubone type
mopeds! could be used for some tomos and safari wheels that have a 118mm ID hub.
|
|
|
|
|
|
|
|
|
|
NOS kreidler mp9 and mp19 brake cable - FRONT
|
|
HERE NOW!!
|
|
|
new old stock original kreidler front brake cable for mp9 and mp19!
kreidler part # 255.04.084
|
|
|
|
|
|
|
|
|
|
polini 10mm wrist pin - 36mm long
|
|
HERE NOW!!
|
|
|
10mm wrist pin for the polini 46mm hobbit cylinder and the polini 46mm vespa 10 pin cylinder plus whatever else you can use it on!!!
36mm long
|
|
|
|
|
|
|
|
|
|
NOS OEM puch maxi forks spring
|
|
HERE NOW!!
|
|
|
NOS OEM puch maxi fork spring!
puch part # 349.2.30.134.1
|
|
|
|
|
|
|
|
|
|
NOS CEV 19782 headlight bucket back COVER
|
|
HERE NOW!!
|
|
|
new old stock original replacement back cover/plate for CEV 19782 headlights!
puch part # 349.4.53.805.1 and 12952
|
|
|
|
|
|
|
|
|
|
USED General moped speedometer drive - push in style
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
Used original OEM speedometer drive for use on General mopeds. For 12mm axles. These spin free n' easy and are ready for use.
as you can see, this is the style that uses a push in type cable!!
|
|
|
|
|
|
|
|
|
|
NOS 90mm stamped italian nude brake plate - REAR
|
|
HERE NOW!!
|
|
|
NEW old stock stamped steel brake plate for lots of italian moped wheels found on garelli, morini, minarelli, etc...
uses 90mm brake pads!!
|
|
|
|
|
|
|
|
|
|
NOS 90mm stamped italian nude brake plate - REAR
|
|
HERE NOW!!
|
|
|
NEW old stock stamped steel brake plate for lots of italian moped wheels found on garelli, morini, minarelli, etc...
uses 90mm brake pads!!
|
|
|
|
|
|
|
|
|
|
USED kreidler intake - 12mm
|
|
HERE NOW!!
|
|
|
USED original intake for the two speed automatic engine found on kreidler flory mp9 and mp19 !!!
12mm ID
kreidler part # 215.03.20
|
|
|
|
|
|
|
|
|
|
OEM honda hobbit PA50II air box rubber TUBE
|
|
*sorry none today*
|
|
|
OEM honda hobbit pa50II rubber air box tube aka dongle. a critical piece
in exacting the airflow to optimize the power of your bone stock
pa50II!
honda part # 17211-148-000 and 17211-148-641
|
|
|
|
|
|
|
|
|
|
USED puch vdo speedo drive - plastik fantastiche edition
|
$29.99 alternate reality price $24.99
HERE NOW!!
|
|
|
USED puch VDO speedometer drive gear. this goes on the axle and works with leleu wheels for 11mm front axle.
|
|
|
|
|
|
|
|
|
|
NOS vespa piaggio CEV speedo cover
|
|
HERE NOW!!
|
|
|
new old stock original CEV speedo block off plate for vespa piaggio mopeds!! has a cool lil hold down bracket on the underside!
60mm OD
piaggio part # 121561
|
|
|
|
|
|
|
|
|
|
USED 90mm italian brake plate - FRONT
|
|
HERE NOW!!
|
|
|
USED original 90mm brake plate for TONS of mopeds!! these were found on italian grimeca mag and spoke wheels on various minarelli, morini, garelli, sachs, tomos, etc.
this is the front brake plate for tomos A3 equipped with grimeca 5 star mags!!
tomos part # 217083
|
|
|
|
|
|
|
|
|
|
NOS avanti VIP 2 speed rubber clutch pad SET
|
|
HERE NOW!!
|
|
|
replacement rubber clutch pad SET for your avanti (garelli) VIP two speed moped!
these should work on the two speedo NOI engine as well!
avanti part # 9959-09
|
|
|
|
|
|
|
|
|
|
honda DIO METEOR overbore piston - 39.5mm
|
|
HERE NOW!!
|
|
|
meteor 39.5mm OVERBORE piston for the stock honda DIO cast iron cylinder!!
check the measurements inside!! this may be the perfect piston to use for a custom overbore job!
|
|
|
|
|
|
|
|
|
|
tomos A3 replacement ENCARWI throttle cable
|
|
HERE NOW!!
|
|
|
replacement tomos throttle cable for A3 engines equipped with encarwi carburetors!!
outer length - 35.25"
inner length - 39.375"
|
|
|
|
|
|
|
|
|
|
NOS original puch LELEU front spoke wheel - skinny rim
|
$169.99 alternate reality price $149.99
HERE NOW!!
|
|
|
new old stock original puch LELEU front spoke wheel!
17" x 1.1" rim made by kromag!
|
|
|
|
|
|
|
|
|
|
NOS batavus laura M56 case gasket
|
|
HERE NOW!!
|
|
|
NOS original batavus laura M56 stock case gasket!
batavus part # 490181
trac part # 80032
|
|
|
|
|
|
|
|
|
|
USED puch VDO speedometer drive - METAL
|
$29.99 alternate reality price $26.99
HERE NOW!!
|
|
|
USED puch VDO speedometer drive gear for 11mm front axles!
puch part # 349.2.40.050.0
|
|
|
|
|
|
|
|
|
|
NOS round PROMA baffle - 18mm
|
|
HERE NOW!!
|
|
|
new old stock proma baffle for whatever ya wanna put it on!!
18mm ID
60mm OD
225mm overall length
|
|
|
|
|
|
|
|
|
|
NOS round PROMA baffle - 20mm
|
|
HERE NOW!!
|
|
|
new old stock proma baffle for whatever ya wanna put it on!!
20mm ID
60mm OD
225mm overall length
|
|
|
|
|
|
|
|
|
|
NOS grimeca 105mm brake plate - complete
|
|
HERE NOW!!
|
|
|
new old stock original grimeca 105mm brake plate complete with pads!
found on italian tubone type
mopeds! could be used for some vespa, tomos, etc wheels that have a 105mm ID hub.
|
|
|
|
|
|
|
|
|
|
vespa piaggio polini piston - 41mm - 12 pin
|
|
HERE NOW!!
|
|
|
polini 41mm replacement piston for vespa piaggio. for use in the polini vespa 41mm kits and the olympia 41mm kits ++++ the DR vespa 41mm kit
12 pin version
|
|
|
|
|
|
|
|
|
|
OEM tomos A35 front brake cable
|
|
HERE NOW!!
|
|
|
original OEM tomos A35 front brake cable.
|
|
|
|
|
|
|
|
|
|
tomos OEM a35 headlight bracket LONG - RIGHT / BLACK - v1
|
|
HERE NOW!!
|
|
|
tomos OEM EBR headlight bracket for a35 sprint, lx, and targa! RIGHT side!
tomos part number 222262blk
|
|
|
|
|
|
|
|
|
|
tomos OEM a35 headlight bracket LONG - LEFT / BLACK - v1
|
|
HERE NOW!!
|
|
|
tomos OEM EBR headlight bracket for a35 sprint, lx, and targa! RIGHT side!
tomos part number 222262blk
|
|
|
|
|
|
|
|
|
|
NOS OEM tomos speedometer cable - post 01 / 03 models - 790mm
|
|
HERE NOW!!
|
|
|
this is the oem replacement for all tomos A55 mopeds except for arrow. this is also for A35 revival and 03-06 A35 sprint and LX
|
|
|
|
|
|
|
|
|
|
peugeot polini 70cc replacement B piston
|
|
HERE NOW!!
|
|
|
peugeot polini 70cc 46mm replacement B piston for the 70cc H2O kit. and the same piston for the 70cc air cooled kit.
|
|
|
|
|
|
|
|
|
|
USED batavus M56 50cc cylinder - no piston
|
|
HERE NOW!!
|
|
|
USED batavus M56 50cc cylinder but no piston
|
|
|
|
|
|
|
|
|
|
NOS garelli TEAM headlight fairing - GREY
|
$79.99 alternate reality price $59.99
HERE NOW!!
|
|
|
new old stock garelli TEAM plastic headlight fairing / shroud / dash... whatever ya wanna call it!
this is unpainted and nos, but has a few scratches and stuff here and there from floating around over the years!
|
|
|
|
|
|
|
|
|
|
yamaha DT replacement TURN signal - white
|
|
HERE NOW!!
|
|
|
replacement front or rear TURN signal for yamaha dt50lc + many more
yamaha models! lots of dirt bikes of the same era used these including
XT125, XT200, XT250, XT350, XT550 and XT600.
|
|
|
|
|
|
|
|
|
|
yamaha DT replacement TURN signal - red
|
|
HERE NOW!!
|
|
|
replacement front or rear TURN signal for yamaha dt50lc + many more
yamaha models! lots of dirt bikes of the same era used these including
XT125, XT200, XT250, XT350, XT550 and XT600.
|
|
|
|
|
|
|
|
|
|
small SQUARE turn signal - smoked lens
|
$13.99 alternate reality price $8.99
HERE NOW!!
|
|
|
small, sleek, café style turn signal for use on your moped, scooter, motorcycle, atv, utv, boat, ultralight, etc.
about 40mm x 45mm
|
|
|
|
|
|
|
|
|
|
NOS kreidler mp9 mp19 flory speedometer housing BOTTOM piece
|
|
HERE NOW!!
|
|
|
new old stock original kreidler mp9 flory black plastic speedometer housing BOTTOM half!!
includes the lil bracket too
|
|
|
|
|
|
|
|
|
|
malanca 50cc complete gasket set
|
|
HERE NOW!!
|
|
|
complete gasket set for malanca 50cc mopeds!! not too sure which exact
models this is for as we have never seen a malanca before...maybe you
know?
inlcudes head, base, exhaust, clutch cover and case gaskets!
|
|
|
|
|
|
|
|
|
|
OEM tomos MC50 MC36 throttle cable
|
|
HERE NOW!!
|
|
|
new old stock original tomos throttle cable for MC36 and MC50!
tomos part # 233447
|
|
|
|
|
|
|
|
|
|
tomos original A55 throttle cable for sprint, st, lx, streetmate, revival and arrow
|
|
*sorry none today*
|
|
|
toriginal tomos made A55 replacement throttle cable with bendy for A55 sprint, st, lx, streetmate, revival and arrow. this is NOT for A55 07-08 st, lx or sprint supposedly. later years of st, lx, sprint are fine... as always check to be sure this is actually what you need.
|
|
|
|
|
|
|
|
|
|
USED tomos A3 clutch cover BLACK - kick start
|
|
HERE NOW!!
|
|
|
USED original tomos clutch cover for KICK start A3 engines!!!
tomos part # 217206
|
|
|
|
|
|
|
|
|
|
USED tomos A3 clutch cover GREY - pedal start
|
|
HERE NOW!!
|
|
|
USED original tomos clutch cover for PEDAL start A3 engines!!!
tomos part # 209023
|
|
|
|
|
|
|
|
|
|
USED tomos A35 flywheel cover BLACK - pedal start
|
|
HERE NOW!!
|
|
|
USED original tomos A35 flywheel cover!
for pedal start engines with oil injection!
tomos part # 222387
|
|
|
|
|
|
|
|
|
|
USED tomos A35 flywheel cover BLACK - pedal start
|
$64.99 alternate reality price $39.99
HERE NOW!!
|
|
|
USED original tomos A35 flywheel cover!
for pedal start engines without oil injection!
tomos part # 223471
|
|
|
|
|
|
|
|
|
|
USED tomos A55 flywheel cover - black
|
|
HERE NOW!!
|
|
|
USED tomos OEM A55 flywheel cover! no kickstart stopper!
tomos part number 230871
|
|
|
|
|
|
|
|
|
|
USED tomos A35 A55 clutch cover BLACK - pedal start
|
|
*sorry none today*
|
|
|
USED original tomos clutch cover for PEDAL start A35 and A55 engines!!!
tomos part # 236685
|
|
|
|
|
|
|
|
|
|
USED tomos A35 engine case
|
|
HERE NOW!!
|
|
|
USED engine case for tomos A35!! perfect if you stripped out a stud, messed up your case, or could just use extra parts!!
|
|
|
|
|
|
|
|
|
|
USED batavus exhaust bracket
|
|
HERE NOW!!
|
|
|
USED original bracket for mounting your batavus exhaust!!
about 13.5" long
|
|
|
|
|
|
|
|
|
|
NOS garelli exhaust pipe rubber COUPLER
|
|
HERE NOW!!
|
|
|
NOS garelli exhaust pipe rubber coupler!!
this joins the muffler and the header!
22mm ID on one side, 24mm ID on the other!
|
|
|
|
|
|
|
|
|
|
USED tomos A35 stock 50cc head
|
$34.99 alternate reality price $24.99
HERE NOW!!
|
|
|
used tomos A35 stock 38mm 50cc head in black or silver!
used and dirty!
|
|
|
|
|
|
|
|
|
|
USED tomos A3 clutch cover BLACK - pedal start
|
|
HERE NOW!!
|
|
|
USED original tomos clutch cover for PEDAL start A3 engines!!!
tomos part # 217206
|
|
|
|
|
|
|
|
|
|
USED oem tomos A3 BLACK flywheel COVER - WITH oil injection
|
|
HERE NOW!!
|
|
|
USED original tomos a3 flywheel cover!!! this version is for late tomos A3 models with oil injection!
tomos part # 222384
|
|
|
|
|
|
|
|
|
|
USED oem tomos A3 flywheel COVER - silver
|
|
HERE NOW!!
|
|
|
USED original tomos a3 flywheel cover!!! this version is for tomos A3 models without oil injection!
tomos part # 209026
|
|
|
|
|
|
|
|
|
|
OEM cev BLUE BACKGROUND 40mph italian speedometer
|
|
HERE NOW!!
|
|
|
new old stock 40mph blue face baby CEV speedometer! amazingly, it
is NOT frozen!! probably the only functioning CEV speedo still around!!
|
|
|
|
|
|
|
|
|
|
USED honda NA50 NC50 PA50 hobbit speedometer
|
|
HERE NOW!!
|
|
|
USED original 30mph speedo for 1979 through 1981 honda NA50 express II
as well as pa50i and pa50ii hobbit. basically it should work on pretty
much hobbit and a lot of years of express and express II. not for urban
express though!
|
|
|
|
|
|
|
|
|
|
USED puch complete VDO 30 mph speedometer with housing - green and orange version
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
NOS puch 30mph speedo with odometer, this version includes the complete
black plastic housing as well. these are the green and orange speedos
found on ZA50 equipped puch models!
|
|
|
|
|
|
|
|
|
|
USED puch complete VDO 30 mph speedometer with housing
|
$59.99 alternate reality price $44.99
HERE NOW!!
|
|
|
Used puch 30mph speedo with odometer, this version includes the complete black plastic housing as well.
|
|
|
|
|
|
|
|
|
|
USED puch complete VDO speedometer with housing - FROZEN
|
$29.00 alternate reality price $17.99
HERE NOW!!
|
|
|
frozen puch 30 or 40 mph speedo with odometer, this version includes the complete black plastic housing as well. might be a normal black face speedometer or the orange and green ZA50 style speedo.
really ya just get this for the housing
|
|
|
|
|
|
|
|
|
|
USED puch complete VDO 40 mph speedometer with housing - pinto style
|
$59.99 alternate reality price $47.99
HERE NOW!!
|
|
|
used puch 40mph speedo with odometer, this version includes the complete
black plastic housing as well. these are the solid black background
speedos with VDO instead of the puch logo on the face..
came off a pinto!!
|
|
|
|
|
|
|
|
|
|
NOS sachs VDO 45mph speedometer - 48mm
|
|
HERE NOW!!
|
|
|
NOS original sachs 45mph speedo with odometer!
48mm OD aka the smaller size!
|
|
|
|
|
|
|
|
|
|
USED sachs VDO 45mph speedometer - 48mm
|
|
HERE NOW!!
|
|
|
USED original sachs 45mph VDO speedo with odometer!
48mm OD aka the smaller size!
|
|
|
|
|
|
|
|
|
|
USED original VDO 40 mph speedometer - CHROME rim
|
|
HERE NOW!!
|
|
|
USED original VDO 40 mph 60mm speedometer + odometer! these are tested and work!!
the one you will receive will have between 0 and 99999 miles! amazing!
CHROME rim around the top!
|
|
|
|
|
|
|
|
|
|
NOS original VDO 40mph speedometer - BLACK rim
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
new old stock original VDO 40 mph speedometer for puch, sachs, and batuvus!
BLACK rim around the top!
60mm OD
|
|
|
|
|
|
|
|
|
|
USED puch speedometer chrome bezel
|
|
HERE NOW!!
|
|
|
USED original puch speedometer bezel/ring!
part of puch part # 328.2.53.530.0
|
|
|
|
|
|
|
|
|
|
USED puch speedometer housing bracket - version 1
|
|
HERE NOW!!
|
|
|
USED original puch speedometer bracket. this critical piece attached the
plastic housing speedo housing to the triple tree top plate on puch
mopeds!! note there are a couple different versions!
|
|
|
|
|
|
|
|
|
|
USED puch speedometer housing bracket - version 2
|
|
HERE NOW!!
|
|
|
USED original puch speedometer bracket. this critical piece attached the
plastic housing speedo housing to the triple tree top plate on puch
mopeds!! note there are a couple different versions!
|
|
|
|
|
|
|
|
|
|
USED puch speedometer housing bracket - version 3
|
|
HERE NOW!!
|
|
|
USED original puch speedometer bracket. this critical piece attached the
plastic housing speedo housing to the triple tree top plate on puch
mopeds!! note there are a couple different versions!
|
|
|
|
|
|
|
|
|
|
USED puch speedometer housing bracket mounting SCREW
|
|
HERE NOW!!
|
|
|
USED original puch speedometer bracket mounting screw. this lil screw
attached the mounting bracket to the plastic speedometer housing!!
|
|
|
|
|
|
|
|
|
|
USED puch VDO speedometer bracket
|
|
HERE NOW!!
|
|
|
USED original puch speedometer bracket. this holds the speedometer into
the plastic housing found on puch maxi, newport, freespirit, pinto, etc.
|
|
|
|
|
|
|
|
|
|
NOS vespa piaggio grande deluxe oil injection TANK
|
|
HERE NOW!!
|
|
|
new old stock original vespa piaggio / gilera plastic oil injection tank
for the rare and illusive vespa grande deluxe!! also known as the
gilera CBA in europe.
gilera part # 307952
|
|
|
|
|
|
|
|
|
|
NOS original VDO 40 mph speedometer - CHROME rim
|
|
HERE NOW!!
|
|
|
new old stock original VDO 40 mph 60mm speedometer + odometer! these are tested and work!!
CHROME rim around the top! these mostly came on sachs!
|
|
|
|
|
|
|
|
|
|
USED puch VDO speedometer cable - 65cm
|
|
HERE NOW!!
|
|
|
USED original VDO speedometer cable for puch mopeds!! for those that enjoy OEM quality, here ya go.
65cm long!!
|
|
|
|
|
|
|
|
|
|
NOS batavus m48 pulley - 13T
|
|
HERE NOW!!
|
|
|
new old stock original pulley for batavus m48!!
13t sprocket for the 25/30mph models! ripper!
batavus part # 481598
|
|
|
|
|
|
|
|
|
|
USED batavus m48 pulley - 13T
|
|
HERE NOW!!
|
|
|
USED original pulley for batavus m48!!
13t sprocket for the 25/30mph models! ripper!
batavus part # 481598
|
|
|
|
|
|
|
|
|
|
NOS batavus center stand - 9"
|
|
HERE NOW!!
|
|
|
new old stock batavus centerstand!! 9" longer version for certain models that need that extra length!
|
|
|
|
|
|
|
|
|
|
USED general 5 star / lazer speedometer
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
USED original general 5 star / lazer speedometer. with some miles. tested and works. thats good.
the one you will receive will have between 0 and 99999 miles! amazing!
|
|
|
|
|
|
|
|
|
|
USED morini M1 case inducted stock 50cc cylinder - no piston
|
|
HERE NOW!!
|
|
|
USED stock 50cc cylinder for morini M1 case inducted engines !
|
|
|
|
|
|
|
|
|
|
USED puch speedometer plastic housing
|
|
HERE NOW!!
|
|
|
USED original puch plastic speedometer housing!
puch part #s 328.2.53.523.1 and 359.1.53.022.1
|
|
|
|
|
|
|
|
|
|
USED kreidler mp9 and mp19 head
|
|
HERE NOW!!
|
|
|
USED original head for the two speed automatic engine found on kreidler flory mp9 and mp19 !!!
as you can see, these are a lil dirty n dusty! maybe you'll get an old spark plug if you're lucky.
|
|
|
|
|
|
|
|
|
|
USED kreidler mp9 and mp19 cylinder - size F
|
$79.99 alternate reality price $59.99
HERE NOW!!
|
|
|
USED original stock cylinder for the two speed automatic engine found on kreidler flory mp9 and mp19 !!!
size F!
kreidler part # 215.03.73
|
|
|
|
|
|
|
|
|
|
USED kreidler mp9 and mp19 cylinder - size H
|
$79.99 alternate reality price $59.99
HERE NOW!!
|
|
|
USED original stock cylinder for the two speed automatic engine found on kreidler flory mp9 and mp19 !!!
size H!
kreidler part # 215.03.73
|
|
|
|
|
|
|
|
|
|
NOS white step through mystery gas tank
|
$79.99 alternate reality price $69.99
HERE NOW!!
|
|
|
what! a new old stock step through mystery tank! not too sure what
exactly it is for, but my guess would be garelli. looks to hold a decent
amount; 1.2g+ if i had to guess...
mounting tabs on the top are about 75mm apart
approximate tank dimensions are 380mm L x 150mm H x 210mm W
|
|
|
|
|
|
|
|
|
|
USED derbi DS50 tail light
|
|
HERE NOW!!
|
|
|
USED derbi DS50 CEV tail light lens and reflector!!
various CEV part #s that appear on the lens: 328, 329, 330, 43415, 0243509
|
|
|
|
|
|
|
|
|
|
USED original CEV 9350 tail light - chrome back
|
$69.99 alternate reality price $49.99
HERE NOW!!
|
|
|
USED genuine CEV 9350 tail light assembly!!
this one has a CHROME back!
|
|
|
|
|
|
|
|
|
|
NOS motobecane cylinder - 38.95mm - size C
|
|
HERE NOW!!
|
|
|
new old stock original motobecane cylinder measuring about 39mm!
size C (38.95mm)
part of part # 23460
|
|
|
|
|
|
|
|
|
|
NOS motobecane 410 pedal chain master link
|
|
HERE NOW!!
|
|
|
NOS motobecane 410 pedal chain master link!
motobecane part # 14368
|
|
|
|
|
|
|
|
|
|
NOS moped master link repair kit for 415 chain
|
|
HERE NOW!!
|
|
|
super sweet vintage new old stock moped chain repair kit for 415 drive chain!!
includes a half link, master link, center link and two master link clips!!
|
|
|
|
|
|
|
|
|
|
NOS tomos OEM master link for 415 chains
|
|
HERE NOW!!
|
|
|
tomos original 415 chain master link!!! use it for any other 415 chain too...
tomos part number 202268
|
|
|
|
|
|
|
|
|
|
tomos OEM revival highway PEGS / universal dubz pegs
|
|
HERE NOW!!
|
|
|
the dream of cruisin a revival down wherever the road takes ya can now somewhat be a reality with ORIGINAL tomos nos revival footpegs...if you got the super dope crash bars on front then your bike is dying for these...
or just use it for rear footpegs on any bike that has a 10mm hole!! these click up and stay folded verry nicely. made in japan!
tomos part number 000013
|
|
|
|
|
|
|
|
|
|
NOS GRABOR rectangle kill switch
|
|
HERE NOW!!
|
|
|
GRABOR rectangle kill switch.
part number 234639, 189833
|
|
|
|
|
|
|
|
|
|
NOS chrome puch light and horn switch - COMPLETE
|
$79.99 alternate reality price $67.99
HERE NOW!!
|
|
|
og chrome puch light n horn switch!! complete!!
puch part # 349.2.53.817.0
|
|
|
|
|
|
|
|
|
|
NOS kreidler mp9 and mp19 head
|
$49.99 alternate reality price $37.99
HERE NOW!!
|
|
|
NOS kreidler head for mp9 and mp19 engines !!!
|
|
|
|
|
|
|
|
|
|
original CEV metal round on/off/horn switch - BASE ONLY
|
|
HERE NOW!!
|
|
|
original CEV metal round on/off/horn switch base.. the cev part number for this switch is 16574, but these go to the the CEV 8040.5 switches!!!!
|
|
|
|
|
|
|
|
|
|
NOS CEV metal round switch clamp
|
|
HERE NOW!!
|
|
|
new old stock original CEV metal round switch clamp... these go to most every round cev switch ever. trust me. im a clamp.
|
|
|
|
|
|
|
|
|
|
HPI flywheel puller
|
|
HERE NOW!!
|
|
|
special HPI flywheel / magneto / rotor puller for HPI ignitions
|
|
|
|
|
|
|
|
|
|
treatland's GOLD TOOTH grey pullover
|
|
|
HERE NOW, BUT NOT FOR LONG!
gold tooth baby
|
|
|
|
|
|
|
|
|
|
NOS Garelli CEV metal bolt-on lights horn switch - HORN button
|
|
HERE NOW!!
|
|
|
CEV metal bolt-on lights horn switch. you got a horn, hi beam and low beam.. now use them!
this switch bolts right up to these domino brake assemblies!
made by CEV
|
|
|
|
|
|
|
|
|
|
USED motobecane 50cc stock head
|
|
*sorry none today*
|
|
|
USED original 50cc stock like motobecane head with decompression valve on.
clean it and deck it for max performance.
|
|
|
|
|
|
|
|
|
|
NOS garelli black plastic gas cap that says garelli on it
|
|
HERE NOW!!
|
|
|
new old stock original GARELLI plastic push in style gas cap!!
OD of part you shove in = 32mm
|
|
|
|
|
|
|
|
|
|
NOS puch CEV 19845 tail light, also CEV 9417
|
$100.00 alternate reality price $59.99
HERE NOW!!
|
|
|
original OEM CEV 19845 taillight for pretty much anything ya like puch, tomos. etc. pretty much impossible to beat the original CEV quality.
version 2 = orange side reflectors!!
|
|
|
|
|
|
|
|
|
|
NOS garelli CEV 19318 9401 tail light assembly
|
|
HERE NOW!!
|
|
|
new old stock original CEV 19318 tail light assembly! these came on late 70's garelli mopeds!
CEV part # 9401
|
|
|
|
|
|
|
|
|
|
NOS CEV 291 296 41843 turn signal - no arm
|
|
HERE NOW!!
|
|
|
new old stock original cev plastic turn signal for various mopeds!
cev part numbers: 41843 (housing), 291 296 (lens), 41875 (reflector)
|
|
|
|
|
|
|
|
|
|
NOS garelli ROUND post single seat - RED logo
|
$70.00 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock garelli single seat...ROUND post edition!!
26mm seat post diameter
|
|
|
|
|
|
|
|
|
|
NOS garelli TEAM headlight fairing - RED
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
new old stock garelli TEAM plastic headlight fairing / shroud / dash!
nos, but has a few scratches and stuff here and there from floating around over the years!
|
|
|
|
|
|
|
|
|
|
NOS CEV style wiring harness with switch
|
$34.99 alternate reality price $29.99
HERE NOW!!
|
|
|
new old stock wiring harness with horn, turn signal and mystery switch!!
a very helpful starting point to wiring your bike!!
|
|
|
|
|
|
|
|
|
|
NOS vespa ciao spring style seat
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock vespa ciao spring style seat with round post.
seat post diameter is 25mm!
seat port length is 110mm!
|
|
|
|
|
|
|
|
|
|
CEV black tail light 240
|
$44.99 alternate reality price $39.99
HERE NOW!!
|
|
|
CEV tail light for pretty much anything ya like.. this one has a bulb for your license plate, sweet!
of and if ya wanna get a tail light grill get one HERE !!
|
|
|
|
|
|
|
|
|
|
CEV plastic bolt-on on off lights and horn switch
|
$39.99 alternate reality price $31.99
HERE NOW!!
|
|
|
CEV plastic bolt-on light switch + horn button!
this switch bolts right up to these domino brake assemblies!
made by CEV
|
|
|
|
|
|
|
|
|
|
NOS original CEV 9350 tail light - chrome back
|
|
*sorry none today*
|
|
|
new old stock genuine CEV 9350 tail light assembly!!
this one has a CHROME back!
|
|
|
|
|
|
|
|
|
|
treatland's enamel steel coffee cup
|
|
HERE NOW!!
|
|
|
"international friend of moped"
|
|
|
|
|
|
|
|
|
|
USED CEV 9400 tail light bulb base/reflector - 04818 19314
|
|
HERE NOW!!
|
|
|
USED CEV 9400 tail light bulb base/reflector. If you're in need this is a budget friendly fix for your 9400 CEV tail light!!
CEV part numbers 04818 and 19314
|
|
|
|
|
|
|
|
|
|
NOS tomos frame - step through style - PURPLE
|
$666.00 alternate reality price $499.00
HERE NOW!!
|
|
|
new old stock tomos frame ready to be built up!
yep, this is a real purple tomos frame...never been used...hopefully youre not seeing this by the time its already outta stock!!!!
|
|
|
|
|
|
|
|
|
|
NOS CEV 255 turn signal - no arm
|
$34.99 alternate reality price $27.99
HERE NOW!!
|
|
|
new old stock original cev plastic turn signal for various mopeds. came
on many bikes including tomos from 1992 thru 1999, trac, sachs and
more...
this turn signal will work as a right or a left, or a left and a right. you pick!
cev part numbers: 40320 (housing), 255 (lens) , 40321 (reflector)
|
|
|
|
|
|
|
|
|
|
NOS domino throttle assembly - 006
|
$49.99 weekend warrior discount! $37.99
HERE NOW!!
|
|
|
for 7/8" handlebars
160mm overall length
170mm lever length
|
|
|
|
|
|
|
|
|
|
NOS CEV 305 306 turn signal - no arm
|
$27.99 alternate reality price $19.99
HERE NOW!!
|
|
|
new old stock original cev plastic turn signal for various mopeds.
this turn signal will work as a right or a left, or a left and a right. you pick!
cev part numbers: 42416 (housing), 305 and 306 (lens) , 42410 (reflector)
|
|
|
|
|
|
|
|
|
|
original cev rectangle turn signal set for trac mopeds
|
$145.99 alternate reality price $99.99
HERE NOW!!
|
|
|
nos original cev plastic turn signal for trac mopeds.
|
|
|
|
|
|
|
|
|
|
NOS domino LEFT diamond double lever control in black
|
$49.99 Sale Price: $37.99
HERE NOW!!
|
|
|
NOS domino LEFT diamond double lever control in black
|
|
|
|
|
|
|
|
|
|
NOS garelli 16" REAR spoke wheel - no brake plate special
|
$129.99 alternate reality price $84.99
HERE NOW!!
|
|
|
NOS 16" garelli rear spoke wheel!! also pretty easy to fit on many other italian minarelli, morini, etc. powered mopeds.
12mm SEALED axle! score! no brake plate though...
16" x 1.50" rim size...says garelli on the rim!
|
|
|
|
|
|
|
|
|
|
NOS italian 16" spoke REAR wheel - BIG BRAKE - no sprocket special
|
$119.99 alternate reality price $87.99
HERE NOW!!
|
|
|
NOS 16" italian rear spoke wheel!! these fit cimatti and many other
italian minarelli, garelli, morini, etc. powered mopeds. big brake
edition features a 105mm drum!!
no sprocket included!!
16" x 1.50" width rim
|
|
|
|
|
|
|
|
|
|
NOS domino throttle assembly - 001
|
$49.99 weekend warrior discount! $37.99
HERE NOW!!
|
|
|
for 7/8" handlebars
175mm overall length
155mm lever length
|
|
|
|
|
|
|
|
|
|
NOS domino throttle assembly - 002
|
$49.99 weekend warrior discount! $37.99
HERE NOW!!
|
|
|
for 7/8" handlebars
175mm overall length
155mm lever length
|
|
|
|
|
|
|
|
|
|
NOS domino throttle assembly - 003
|
$49.99 weekend warrior discount! $35.99
HERE NOW!!
|
|
|
for 7/8" handlebars
150mm overall length
130mm plastic lever length
|
|
|
|
|
|
|
|
|
|
NOS P.V. throttle assembly
|
|
HERE NOW!!
|
|
|
new old stock P.V. metal throttle assembly with plastic brake lever for
moped use!! these apparently came on various italian mopeds such as
gloria intramotor, benelli, moto guzzi, testi and rizzato!!
|
|
|
|
|
|
|
|
|
|
NOS P.V. brake / clutch lever assembly
|
|
HERE NOW!!
|
|
|
new old stock P.V. brake / clutch lever assembly with plastic levers!!
these apparently came on various italian mopeds such as gloria
intramotor, benelli, moto guzzi, testi and rizzato!!
|
|
|
|
|
|
|
|
|
|
NOS domino throttle assembly - 005
|
$49.99 weekend warrior discount! $37.99
HERE NOW!!
|
|
|
for 7/8" handlebars
160mm overall length
130mm lever length
|
|
|
|
|
|
|
|
|
|
NOS radaelli 16" REAR spoke wheel - xtra wide
|
$129.99 alternate reality price $79.99
HERE NOW!!
|
|
|
NOS 16" radaelli rear spoke wheel for garelli!! featuring an extra wide hub setup...very interesting!
16" x 1.35" rim size
|
|
|
|
|
|
|
|
|
|
NOS 16" front grimeca 7 star mag wheel
|
$124.99 alternate reality price $99.99
HERE NOW!!
|
|
|
new old stock 16" grimeca 7 razze front wheel! these came on the garelli
SSXL LTD, some VIP models and more!! they would look good an any bike
imho!
***this one has some corrosion in spots since it has been kickin around a
warehouse somewhere across the world for 30+ years. there are lots of
small scratches n scrapes in the paint.***
|
|
|
|
|
|
|
|
|
|
NOS piaggio ZIP 10" front wheel - teal
|
$69.99 alternate reality price $29.99
HERE NOW!!
|
|
|
original OEM new old stock piaggio zip front wheel, but use it for another bike if you want a tiny wheel up front!!
measurements inside. altered BRAKE PLATE DEALIO!
|
|
|
|
|
|
|
|
|
|
new old stock SOLO engine
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
the water sits in the cylinder
perfect stocking stuffer
|
|
|
|
|
|
|
|
|
|
USED vespa FRONT 17" banana mag - SILVER
|
$109.99 alternate reality price $89.99
HERE NOW!!
|
|
|
USED original piaggio CIAO banana mag!!
comes with brake plate!!
|
|
|
|
|
|
|
|
|
|
USED garelli NOI cast iron stock 50cc 40mm cylinder - square fin
|
|
HERE NOW!!
|
|
|
USED original garelli NOI cast iron cylinder! this is a 40mm cyl and has
signs of wear but is totally usable still! this is the more common
square fin type cylinder!
cylinder only, no piston!
|
|
|
|
|
|
|
|
|
|
NOS grimeca 16" 3 star DISC wheel - white
|
$179.99 alternate reality price $129.99
HERE NOW!!
|
|
|
new old stock grimeca 3 star mag wheel with disc rotor for whatever ya want! for malaguti top fifty originally!!
220mm rotor!
|
|
|
|
|
|
|
|
|
|
NOS garelli 17" FRONT spoke wheel - wideeee
|
$149.99 alternate reality price $109.99
HERE NOW!!
|
|
|
NOS 17" garelli FRONT spoke wheel!! also pretty easy to fit on many other italian minarelli, morini, etc. powered mopeds.
17" x 1.50" rim size
|
|
|
|
|
|
|
|
|
|
NOS radaelli 16" REAR spoke wheel - wideeee
|
$139.99 alternate reality price $99.99
HERE NOW!!
|
|
|
NOS 16" radaelli rear spoke wheel!! pretty easy to fit on many other italian minarelli, garelli, morini, etc. powered mopeds.
16" x 1.50" rim size
|
|
|
|
|
|
|
|
|
|
USED grimeca 16" grey 5 star 10 razze wheel - FRONT
|
$99.99 alternate reality price $74.99
HERE NOW!!
|
|
|
USED original grimeca 5 star mag wheel for whatever ya want! not 100 percent
sure which this is for, but definitely for something italian...think
minarelli, morini, garelli, pacer, etc. this should be bolt and go for tomos A3 bullet!!! ya might need some extra washers and/or spacers to get it centered though!
16" x 1.35 rim size
|
|
|
|
|
|
|
|
|
|
NOS radaelli 16" REAR spoke wheel
|
$139.99 alternate reality price $99.99
HERE NOW!!
|
|
|
NOS 16" radaelli rear spoke wheel!! pretty easy to fit on many other italian minarelli, garelli, morini, etc. powered mopeds.
16" x 1.35" rim size
|
|
|
|
|
|
|
|
|
|
peugeot SPX prototype chrome EBR forks
|
|
HERE NOW!!
|
|
|
this version, the "prototype" has stamped fork bottoms and a black cover on the top of the fork tubes
|
|
|
|
|
|
|
|
|
|
original tomos turn signal PAIR
|
|
HERE NOW!!
|
|
|
one pair of original OEM tomos turn signals!
pretty sick tinted slightly smoked clear lens and orange inside, futuristic matrix style
tomos part # 237407
|
|
|
|
|
|
|
|
|
|
NOS italian 16" spoke rear wheel - 50t sprocket
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
NOS 16" italian rear spoke wheel!! radaelli rim! these fit cimatti and many other italian minarelli / morini powered mopeds.
|
|
|
|
|
|
|
|
|
|
NOS italian 16" spoke rear wheel
|
$139.99 alternate reality price $99.99
HERE NOW!!
|
|
|
NOS 16" italian rear spoke wheel!! these fit cimatti and many other italian minarelli, garelli, morini, etc. powered mopeds.
|
|
|
|
|
|
|
|
|
|
vespa piaggio malossi RHQ racing crankshaft - 12mm wrist pin
|
|
HERE NOW!!
|
|
|
malossi race crank for all vespa piaggio mopeds such as ciao, bravo,
grande, SI, boss, grillo and citta!! fully heat treated and reinforced!
dynamically balanced for smooth operation up to 16k rpm! wow!!
12mm wrist pin!!
|
|
|
|
|
|
|
|
|
|
USED garelli rally sport sidecover SET - silver
|
|
HERE NOW!!
|
|
|
USED original garelli rally sport sidecover set!
silver! in good shape, a lil tiny bit of rust, some dings n dents here and there. not too bad!
|
|
|
|
|
|
|
|
|
|
NOS grimeca 17" silver 5 star 10 razze wheel - front
|
$165.00 alternate reality price $129.99
HERE NOW!!
|
|
|
new old stock original grimeca 17" 10 razze aka 5 star front wheel!
these were found on lots of italian bikes like cimatti oasi n more!
|
|
|
|
|
|
|
|
|
|
USED italian 16" spoke rear wheel - NO sprocket
|
|
HERE NOW!!
|
|
|
USED 16" italian rear spoke wheel!! radaelli rim! these fit cimatti and many other italian minarelli / morini powered mopeds.
|
|
|
|
|
|
|
|
|
|
NOS silver 16" grimeca snowflake wheel - REAR
|
$149.99 alternate reality price $122.99
HERE NOW!!
|
|
|
new old stock silver grimeca REAR snowflake mag wheel. pretty sure
these are for garelli. definitely for something italian...probably some
tubone type bike. think minarelli, morini, garelli, pacer, etc.
definitely easy to adapt to whatever ya want.
12mm loose bearing axle!
|
|
|
|
|
|
|
|
|
|
USED 17" peugeot 102 spoke wheel - REAR
|
|
HERE NOW!!
|
|
|
USED original peugeot 102 skinny spoke wheel!!
comes with an 12mm axle with loose bearings, freewheel, brake plate, and maybe a crappy tire. NO sprocket included!
|
|
|
|
|
|
|
|
|
|
NOS garelli 16" REAR spoke wheel - wideeee
|
$129.99 alternate reality price $84.99
HERE NOW!!
|
|
|
NOS 16" garelli rear spoke wheel!! also pretty easy to fit on many other italian minarelli, morini, etc. powered mopeds.
12mm SEALED axle! score! missing brake pads and sprocket!
16" x 1.50" rim size
|
|
|
|
|
|
|
|
|
|
NOS garelli 16" REAR spoke wheel - wideeee
|
$149.99 alternate reality price $122.99
HERE NOW!!
|
|
|
NOS 16" garelli rear spoke wheel!! also pretty easy to fit on many other italian minarelli, morini, etc. powered mopeds.
12mm SEALED axle! score!
16" x 1.50" rim size
|
|
|
|
|
|
|
|
|
|
NOS italian 16" spoke REAR wheel - BIG BRAKE - no sprocket special
|
$119.99 alternate reality price $87.99
HERE NOW!!
|
|
|
NOS 16" italian rear spoke wheel!! these fit cimatti and many other
italian minarelli, garelli, morini, etc. powered mopeds. big brake
edition features a 105mm drum!!
no sprocket included!!
|
|
|
|
|
|
|
|
|
|
NOS italian 16" spoke REAR wheel - BIG BRAKE - no brake plate special
|
$119.99 alternate reality price $72.99
HERE NOW!!
|
|
|
NOS 16" italian rear spoke wheel!! these fit cimatti and many other
italian minarelli, garelli, morini, etc. powered mopeds. big brake
edition features a 105mm drum!!
no brake plate included!!
|
|
|
|
|
|
|
|
|
|
USED universal 16" front snowflake mag wheel
|
$79.99 alternate reality price $63.99
HERE NOW!!
|
|
|
USED universal 16in snowflake wheel for whatever you want. centered
brake plate tab should work on many different forks. found on many
italian bikes such as minarelli, garelli, morini, etc. plus sachs n such.
16" x 1.35" rim size
|
|
|
|
|
|
|
|
|
|
NOS grimeca 17" grey 5 star 10 razze wheel - front
|
$165.00 alternate reality price $119.99
HERE NOW!!
|
|
|
new old stock original grimeca 17" 10 razze aka 5 star front wheel!
these were found on lots of italian bikes like cimatti oasi n more!
|
|
|
|
|
|
|
|
|
|
NOS 16" garelli grimeca 7 razze SILVER mag wheel - FRONT
|
$150.00 alternate reality price $124.99
HERE NOW!!
|
|
|
new old stock 16" grimeca 7 razze front wheel! these came on the garelli
SSXL LTD, some VIP models and more!! they would look good an any bike
imho!
silver!!
|
|
|
|
|
|
|
|
|
|
NOS 16" grimeca snowflake wheel SET - SILVER
|
$339.99 alternate reality price $269.99
HERE NOW!!
|
|
|
NOS silver grimeca 16" snowflake mag wheel set. pretty sure these are
for garelli. definitely for something italian...probably some tubone
type bike. think minarelli, morini, garelli, pacer, etc. definitely easy
to adapt to whatever ya want.
17" x 1.35" rim size
|
|
|
|
|
|
|
|
|
|
NOS silver 16" grimeca snowflake wheel - FRONT
|
$149.99 alternate reality price $124.99
HERE NOW!!
|
|
|
new old stock silver grimeca FRONT snowflake mag wheel. pretty sure
these are for garelli. definitely for something italian...probably some
tubone type bike. think minarelli, morini, garelli, pacer, etc.
definitely easy to adapt to whatever ya want.
11mm loose bearing axle!
|
|
|
|
|
|
|
|
|
|
USED stock SOLO exhaust
|
$69.99 alternate reality price $34.99
HERE NOW!!
|
|
|
USED original SOLO exhaust!! definitely the most technologically advanced exhaust system of any moped ever made.
it's like the one in the photo, but with more dirt n oil on it because it's used!
|
|
|
|
|
|
|
|
|
|
NOS bernardi 16" GREY clover mag - FRONT
|
$149.99 alternate reality price $124.99
HERE NOW!!
|
|
|
new old stock original front bernardi CLOVER mag wheel in grey! for
maybe garelli, minarelli, tomos, sachs...? easy to adapt to whatever ya
want so check it out!!
this one has a slightly
different brake plate than the other ones we sell!!
|
|
|
|
|
|
|
|
|
|
NOS grimeca 16" GREY 5 star 10 razze stella front wheel - NUDE
|
$69.99 alternate reality price $49.99
HERE NOW!!
|
|
|
ZUUUUPER DEAL!
***this just in! these work as a replacement for tomos A3 bullet!!***
16" x 1.35 rim size grimeca 5 star mag wheel for whatever ya
want!
|
|
|
|
|
|
|
|
|
|
USED grimeca 17" grey 5 star 10 razze wheel - REAR
|
$129.99 alternate reality price $69.99
HERE NOW!!
|
|
|
USED original grimeca 17" 10 razze aka 5 star REAR wheel! these were
found on lots of italian bikes like cimatti oasi n more! I actually
think this is new old stock but i'll say it's used for now...
kinda nude
|
|
|
|
|
|
|
|
|
|
NEW puch E50 cases - EURO edition
|
|
HERE NOW!!
|
|
|
NEW puch E50 cases!! wow, so cool! lots of meat around the transfers for portin'
euro
spec, meaning it has a sprocket restrictor (roll pin) along with a
second roll pin for the stator plate. these can be removed easily!
|
|
|
|
|
|
|
|
|
|
vespa moped malossi reinforced crankshaft 10mm
|
$264.99 alternate reality price $239.99
HERE NOW!!
|
|
|
vespa moped malossi reinforced crankshaft 10mm 10 pin style, full circle for reed induction cases only.
|
|
|
|
|
|
|
|
|
|
NOS 10" mini grimeca snowflake wheel SET
|
$199.99 alternate reality price $174.99
HERE NOW!!
|
|
|
NOS mini 10" grimeca snowflake wheel set for anything ya want!! these
came on italian lil guy bikes but are super universal and you can make
em fit on whatever ya want with relative ease.
make your bike SMOL
|
|
|
|
|
|
|
|
|
|
NOS italian 17" spoke FRONT wheel - BIG BRAKE
|
$149.99 alternate reality price $109.99
HERE NOW!!
|
|
|
NOS 17" italian FRONT spoke wheel!! i believe these are for garelli but
should fit many other italian minarelli, cimatti, morini, etc. powered
mopeds. big brake edition features a 105mm drum!!
|
|
|
|
|
|
|
|
|
|
NOS bernardi 16" GREY clover mag - FRONT
|
$149.99 alternate reality price $134.99
HERE NOW!!
|
|
|
new old stock original front bernardi CLOVER mag wheel in grey! for
maybe garelli, minarelli, tomos, sachs...? easy to adapt to whatever ya
want so check it out!!
|
|
|
|
|
|
|
|
|
|
honda hobbit pa50 camino x-treme racing 2-shoe CLUTCH
|
|
*sorry none today*
|
|
|
honda hobbit PA50 camino X-TREME super racing clutch!
two beefy
shoes on oversize posts make this clutch much stronger and more durable
than the stock 3 shoe hobbit clutch!! plus, it's way more adjustable and
capable of higher stall! uses the regular old hobbit clutch puller for
easy removal.
|
|
|
|
|
|
|
|
|
|
complete 10mm FRONT axle for honda hobbit 5 star mags
|
|
HERE NOW!!
|
|
|
complete 10mm front axle assembly for honda hobbit, PA50, camino, etc. FRONT 5 star mag wheels!
comes with everything in the pic! includes axle, axle nuts, washers and spacers! score!!
|
|
|
|
|
|
|
|
|
|
honda hobbit pa50 camino shock BOLTS x2
|
|
HERE NOW!!
|
|
|
honda hobbit pa50 camino shock bolts with washers! these are just like
the original honda shock bolts and feature a nice rounded head to em.
sold as a pair of 2!
|
|
|
|
