BRN 42mm 55cc aluminum kit for morini M1 case inducted motors
looks like you will have to port the transfers yourself..or leave as is? huge exhaust port, 24mm ID
m6 exhaust studs - which is pretty sick. most m1 cylinders always have dinky m5 exhaust stud threading...but not this one!
bust out the dremel and make this thing rip!
no piston with this....you will need a 42mm piston. we have this
malossi puch piston, but the piston height is a bit too short..so it most likely will not run correctly. minarelli piston height (from center of wrist pin to crown of piston) is about 31mm, so that is what you should look for...
interesting kit..cant wait to see someone run it!
