heavy duty TOP rubber mount for dellorto PHBG carburetors
heavy duty rubber mount Dellorto PHBG
 
  $7.99

 :HERE NOW!!
qty:

 
 
gas proof racer approved with two hose clamps !

made by TOP

taco rating 2.5 of 5 Total Reviews: 4 give your taco rating here

  1 taco eaters like this review
 
ummmmm... March 3, 2011
taco eater : Anonymous Person  
i didn't buy this, but- why would you? go to the auto parts store, and for what you pay for this you could get all the hose and clamps you could ever need!

Was this review helpful to you?

  0 taco eaters like this review
 
good but doesn't last December 23, 2010
taco eater : Will Caldwell from San Francisco, CA United States  
works really well...seals up my 19 phbg and hacked stock pipe intake really well. however after the first 2 weeks the rubber was already cracking on the outside. Its been 4 months since and i haven't had any airleaks but it ain't going to last much longer.

Update: Its been 6 months and its done. Radiator hose from Kragen now.

Was this review helpful to you?

  1 taco eaters like this review
 
cracked with a 21mm intake August 25, 2010
taco eater : Tim from San Francisco, CA United States  
my bad, but also should state that this says 17mm on the intake side and 19mm on the carb side..

basically i tried using a 21mm intake and 21mm carb.. carb side is fine.. intake side has a nice spilt on the side.. not all the way through but i know this will fail eventually.. rubber boots always fail on any ride.. just look at 80s rides.. those lame POS cars fail rubber hoses all the f'n time.. im going to buy the slightly more expensive boot when treats gets them

Was this review helpful to you?

  0 taco eaters like this review
 
A good device... kinda July 3, 2010
taco eater : Anonymous Person from Nashville, TN United States  
this mount worked great at first, but the heat from my engine made the rubber soft enough to let the carb wiggle around causing an air leak.

Was this review helpful to you?