taco eater :
Ryan Nash from Columbia, MO United States
fits great, I suggest drilling out the holes and using using nuts n' bolts to hold it on.
vforce reeds drop right in
you will be cursing yourself when you have to tune a big carb on this (TM24, etc.) it is a pain in the dick to fit the carb in the subframe, like ferociously a pain in the dick.
Was this review helpful to you?
0 taco eaters like this review
your only option (other than custom fab)
July 18, 2011
taco eater :
blindeypipey
if you wanna put a 4 petal on your flat reed this is the only way to do it, unless you custom fabricate your own intakes. i got the boyseen pro reeds as well and am running this with a round slide mik 24. you might consider dremel work on the carb to get it to fit better... the aluminum is pretty soft but if you're careful (ie don't overtorque) you won't strip it.... i have no idea how it compares to a 19 mil intake with a single reed, i decided to just get the big setup
Was this review helpful to you?
2 taco eaters like this review
okay
April 27, 2011
taco eater :
Joshua from philadelphia
i bought 2 of these. the first one fell out of my basket and got ran over by a car and was destroyed. The second one i installed and it worked great. a very tight fit with a 24mm mikuni but i got mine in there with no modification at all. Not too much of a noticeable power gain over a 19mm intake and a PHBG but its gotta be better right? anyway this is made out of the softest aluminum that the company could find. You will strip the threads so you will have to get some longer bolts and add your own nutz.