|
| |
1 people like this review
|
| |
 |
 |
 |
|
easy to use/work on |
July 22, 2010 |
| taco eater:
Stefan Didizian
from Huntingdon Valley, PA United States
|
|
easy to install. Use a 1mm shim for the stock motobecane bendy intake. With the lever choke you can rip off the choke cable from the old carb and never look back! get around 53 for a moby 50v
Was this review helpful to you? 
|
|
 |
|
 |
|
| |
6 people like this review
|
| |
|
|
|
|
replaced Encarwi (Batavus HS50) |
November 4, 2009 |
| taco eater:
Dimitri Tripodakis
from Needham, MA United States
|
|
I replaced the Encarwi carb on my otherwise STOCK Batavus HS-50 (25mph version). To do the same, you will need a shim for the manifold since it is 2mm smaller in diameter. The throttle cable will "plug and play". The choke cable you will need to toss or find a way to make it work. The clearance for the fuel line is tight but it can fit with no problems or alterations. Finally, I used a round file to open up the inner diameter (ID) of the stock manifold to match the ID of the "out-take" of the Dellorto 14.12. The HS50 now runs consistently well using a #61 jet (on the rich side I believe). I haven't clocked the mph but it definitely feels faster overall. Not much difference in acceleration as in cruising/top speed. Im glad I replaced the stock carb with this one, the moped feels much more reliable. And of course, thanks TREATS for your super fast shipping and moreover, your....well, to say it simple, you guys are nice people.
Was this review helpful to you?
|
|
|
|
|
|
|
