taco eater :
Mariano from Baltimore, MD United States
just got one fresh from a new batch from weak ends, its about a 1/4inch too tall to fit under the frame on a 2010 tomos sprint with airsal 70cc kit. gonna have to cut and reweld..
Edit: worked this out with the weak-ends guys.. looks like the 70cc airsal kit raises the intake about a half inch closer to the frame making this intake difficult to fit. Best bet is to chop about a half inch out of the first section of pipe off the mount flange and re-weld. Also, swap out your studs and mount this with some nice socket head cap screws with a lock washer because you won't have the space for a hex nut over the stud..
Was this review helpful to you?
0 taco eaters like this review
not for streetmate r
May 27, 2013
taco eater :
slow and disorderly from prescott, AZ United States
If you get it on the airsal kit with cutting a half inch out it will work.just make sure you measure and weld it strait.nice quality though.
Was this review helpful to you?
0 taco eaters like this review
A55 intake just too tall........
June 15, 2012
taco eater :
Rodney Gentzel from Royal Oak, MI United States
I had to have a 1/2 removed so it would fit on my arrow.........(height was off) But other wise its a great intake, works awesome!!!
Was this review helpful to you?
0 taco eaters like this review
Not right size
November 24, 2011
taco eater :
Slim Shady from 8 Mile
Intake is a little bit too tall and will hit the bottom of the tank. you have to take off the piece thats holding the wires and spark plug wire up. you have to put it on the cylinder and LIGHTLY tap the cylinder with hammer to get it to fit.