SILVER front disc brake caliper - flat mount
SILVER front disc brake caliper - flat mount


silver hydraulic disk brake caliper for use on forks with mounting tabs that are NOT offset!

this caliper works well with the hydraulic EBR forks as long as you double check that the mounts on your forks are not offset.

works with the tomos EBR forks BUT you'll have to use a few washers to get the alignment right because the mounting is flat on this but on the forks the mount is offset

also works great with the mike thomas disc brake set up

BANJO NOT SHOWN but DOES come with one and washers. it is m10 x 1.25 thread

grab replacement brake pads here

bottom mount hole is m8 x 1.25mm thread
top mount hole is 8mm

mount spacing = 60mm

  rate this moped part be the first!