Return to puch EBR BLACK magnum forks
 :
page of 1


  0 taco eaters like this review
 
4 of 5 Forks on a pinto September 18, 2018
taco eater : richard eberline from Trenton, MI United States  
Lower bearing cup very tight. Remove all the paint, and dremel to fit. Can use some heat
to help. Regular pinto stand too short, use a magnum center stand. Used a thicker stem nut (taller), same diameter. better than OEM.

Was this review helpful to you?

  0 taco eaters like this review
 
2 of 5 headtube too short November 1, 2014
taco eater : Allison Montoya from Prescott, AZ United States  
not enough threads to get the top nut on even with grinding the shit out of them


Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Really close replacement for Free Spirit August 21, 2014
taco eater : Michael Gray from Shelton, WA United States  
I had to drill a new hole in each tab for mounting the fender stabilizer. Its missing the tabs in back for the rear fender brackets. It also lacks a place for mounting the speedometer, or even a speedometer bracket.

I was able to fix all those things though, and now it works great. If feels heavy duty, and bolts right up with my wheel and frame. The tab for the brake assembly fits perfect.

Was this review helpful to you?

  2 taco eaters like this review
 
2 of 5 Made in china???? February 19, 2013
taco eater : Murray Man from Warren, MI United States  
So the spring ends werent screwed down all the way and were bolted together unevenly right out of the box.  Apparently no one takes pride in there jobs at EBR. Also tube that goes through the head tube is too fat for the bottom race to fit over the threads. Goes to the threads then stops. Had to spend 25 minutes dremeling out the center of the bottom race to get to go to the bottom. Does any one take pride is stuff they build any more?

Was this review helpful to you?

  2 taco eaters like this review
 
5 of 5 pinto pimpin March 30, 2011
taco eater : The Doctor from O'Fallon Holy Rollers  
yep, put these on a 78 pinto,,, flawless,,, purdie too!  all you need it to get yer self some candied bacon, and yer set

Was this review helpful to you?

  7 taco eaters like this review
 
4 of 5 bearing cup is a hassle to get on May 19, 2009
taco eater : lee from cincinnati  
loads better then your stock sloppy twisty springy forks

but when putting your original lower bearing cup on it the black paint on the threaded tube is thick enough to mess up the works

i suggest sanding it off before attempting i used a ujoint tool to press mine on which took off the paint as it went

Was this review helpful to you?