peugeot MVT allumage MILLENIUM CDI ignition - large taper
Peugeot allumage MVT millenium CDI ignition
 
  $225.00

 :*sorry none today*

qty:

 
 
allumage MVT millenium CDI ignition for most peugoet mopeds, 103, tsm, tsa + more. includes some of what you need to set it up - stator plate, flywheel, CDI box, nuts/bolts and illustrated instructions in french.

this CDI works with stock cranks and other peugeot cranks with the large taper.

the peugeot one does NOT come with an external coil. get this one or try another.

lights, yes!

and if you need a puller get the 27mm x 1.25mm / 20mm x 1mm super puller!

i recommend translating the instructions from french to your native tongue for full understanding. here is a translation of the steps that explain how to mount the stater.

"remove the original bolts for fixing behind the plate. position the 2 5x20 domed head allen bolts in place of the original bolts. position the MVT stator with 2 provided 5x20 allen bolts, postion the stater so the wires are not pinched."

taco rating taco rating 4.5 of 5 4.5 of 5 Total Reviews: 2 give your taco rating here

  3 taco eaters like this review
 
5 of 5 Zeus can't make sparks like this !!!! April 5, 2011
taco eater : Aaron Fogg (SuiCycle) from Memphis TN  
Sparking almost 2" from the plug WOW !!! So worth the $200.

Make sure you have the 5 coil stator plate and jusr cut out the center part of the plate (leave the mounting holes for the new stator). Your spark problems will be gone !!!

Plug the box in, brown wire to the tail light, blue wire to the head light, yellow/green wire to the ground, clip the blue wire on the CDI box. Set timing to 0.3mm BTDC and RIP!!!!!!!!!!!!!!!!!!!!!!

Was this review helpful to you?

  2 taco eaters like this review
 
4 of 5 could be awesome July 27, 2010
taco eater : Jonathan Ackerman from Minneapolis, MN United States  
you need to have a 5 coil stator plate to mount this to. If you have a 2 coil stator plate it won't mount on it. sooooo either hope you have a 5 coil already or look for a 5 coil plate to use with this.

i'm sure when i have a 5 coil plate it will be awesome

Was this review helpful to you?