NOS minarelli V1 clutch bell bushing - version 1
NOS minarelli V1 clutch bell bushing
 



  $18.99

 :*sorry none today*

qty:

 
 
new old stock original minarelli v1 clutch bell bushing! this is the bushing that is most commonly found in taper fit v1 motors. if you have an older motor with a stub plane clutch you will need a bushing with a 1mm small ID.

17mm OD
14mm ID
16.7mm long

note these can fit a little tight at first; sand as needed to assemble!

part # 6040 on the diagram

  rate this moped part be the first!