MLM puch/universal high tension coil bracket!
MLM puch/universal high tension coil bracket!
 
  $8.99

 :HERE NOW!!

qty:

 
 
MLM puch high tension coil bracket for ease of mounting!! this is a super useful lil bracket that makes it a breeze to mount your coil to the stock location on an e50. this is really great for any bike actually!! use it to slap yer coil anywhere the heart desires..

slotted bolt holes allow for a coil mount spacing of about 32mm up to 54mm! this means it'll accommodate the red coil up to the stock bosch coil!! they are also large enough to use m6 bolts if you wanna do that. the bottom mount hole is also 6mm!

remember, these are e-coated which is similar to powder coat. it will NOT ground properly if you are using a self-grounded coil or attach a ground wire to one of the bolts on it without removing a small bit of the coating to provide metal on metal contact.

taco rating taco rating 5 of 5 5 of 5 Total Reviews: 1 give your taco rating here

  0 taco eaters like this review
 
5 of 5 Spiffy November 10, 2016
taco eater : Matt K from Lancaster, PA United States  
Quality piece. Puts the coil right where I wanted it on my e50 Maxi. Perfecto.

Was this review helpful to you?